7.82 m džambo tipa maināmā virsbūve

Krone 7,82 Jumbo Wechselbrücke, gebraucht

7.82 BDF Krone Smooth Side Swap Body, used (Multiple units available)
RAL: 6005 Moss Green
Gjdpfxsy Am Efe Acwebk

Support height: 1,120 mm
The swap body is weatherproof and the roller shutter door operates smoothly.
Approximate external dimensions in mm:
Length 7,820 Width 2,550 Height 2,925
Approximate internal dimensions in mm:
Length 7,700 Width 2,480 Height 2,700

Door openings in mm:
Width 2,370 Height 2,600
Lashing: Keyhole type

For registration/operation max. permissible gross weight: 16,000 kg Intermodal-capable, including rail coding to DIN EN 13044
Rail approval Code XL (for rail transport over 120 km/h)

Floor frame
195 mm high floor group including floor; rectangular tube longitudinal beams with cross beams and outer frame as welded construction with an underfloor guide tunnel
4 container corner castings on 20' basis, symmetrical overhangs
4 grab pocket rails
7 pairs of lashing rings on sides in rubbing rail

Floor
Type: BO WST
27 mm thick, water-resistant bonded phenolic plywood floor, rated to DIN EN 283; for floor loads up to max. 5,460 kg forklift axle load
2 ventilation openings at the front in the floor (per GGVS)

Box body
Superstructure TYPE AB WST
Internal height: 2,700 mm
Portal height int.: 2,525 mm
Overall height: 2,925 mm
Corner height: 2,900 mm
Full-enclosed construction

Smooth side walls made from galvanized sheet steel cassettes
Roof made from trapezoidal-profile steel sheet, height: 25 mm
2 air vents per side wall
# Rubbing rail and sidewall with cut-outs, internal forklift impact protection, three-sided, approx. 300 mm high
Front wall smooth, galvanized steel cassettes
Front wall interior with 21 mm phenolic ply, 750 mm high, above that a continuous 12 mm phenolic ply
Front wall exterior upper with offset (optimized for curves)
Rear as roller shutter (clear width 2,370 mm), with DB approval Train Plus, replaceable rollers
Flat steel impact protection for roller shutter guide rail
Full internal side walls with keyhole plates
13 steel guide rails each left and right recessed for double-deck loading beams
13 LM loading beams for double-deck loading
Steel horizontal rear impact guard left and right

Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.