Piekabe ar darba platformu

ES-GE Tandemanhänger - Rungen - CV

You can find our complete vehicle stock with immediately and short-term available vehicles on our website.

Excerpt from the equipment. Complete specification available on request.

Chassis:
* Steel welded construction with welded longitudinal beams and penetrated Z-crossmembers; close crossmember spacing for high floor load capacity

Ramp storage:
* Two insertion pockets for one loading ramp each, located between the longitudinal beams behind the axle assembly below the loading platform, with locking plate in the rear headframe

Underrun protection:
* According to EU regulations

Front landing legs:
* Landing legs with single-side operation

Rear supports:
* Two adjustable drop supports

Axles:
* 2 x 10 t air suspension axle assemblies, SAF brand, drum brakes approx. 300 x 200 mm, center-mounted for twin tires, ABS, total air suspension travel approx. 200 mm (raise 140 mm, lower 60 mm), controlled via hand lever with detent function

Tyres:
* 8 units, 235/75 R17.5 – brand at our discretion
* Mounted on 6.75x17.5 rims with offset

Splash guards:
* PVC splash guards in front of and behind axles as per EU regulations

Load securing:
* Lashing ring holes in the outer frame every approx. 150 mm for tie-down straps, pull strength approx. 2.5 t
* 6 pairs of foldable lashing rings, evenly distributed, pull strength approx. 8 t
* Stake pockets for 80/50 removable stakes: 3 pairs of stake pockets in the outer frame, evenly distributed

Brake system:
* Compressed air brake system according to EU regulations with EBS
* Two coils for connection to truck, with red/yellow coupling heads
* Spring-loaded parking brake acting on one axle
Gedpfx Abjy Rwyce Ajit

Floor:
* Approx. 28 mm Z-hardwood floor recessed in the outer frame

Lighting system:
* Lighting system according to EU regulations, 24 Volt, multi-chamber rear lights, license plate lights, side marker lights, and lane guidance lights at the rear, connection plate left on drawbar, incl. connecting cable with 15-pin and 2 x 7-pin plugs

Accessories:
* 2 wheel chocks with bracket
* Detachable beacon at the rear
* Delivery includes 40 mm towing device (GVW max. 13,500 kg)

Paintwork:
* Chassis shot-blasted, cleaned, and hot-dip galvanized to the latest technical standards. Superstructure parts cleaned, primed, and hot-dip galvanized
* Chassis: Hot-dip galvanized + RAL 3002 carmine red
* Hubs: KTL black
* Underrun protection: RAL 9010 pure white
* Rims: RAL 9006 silver
* Attachments: galvanized / KTL black

Contour marking:
* According to EU regulations, yellow on sides and rear (with ES-GE logo)

Including special equipment:
* Rear extension approx. 800 mm incl. underrun protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm
* Mechanically adjustable drawbar in length, 6 x approx. 100 mm, with bolted towing eye approx. 50 mm according to DIN 74053
* 4 rows of transverse stake pockets across the loading area, evenly distributed
* 12 galvanized tubular removable stakes, approx. 80/50/4 mm, approx. 1,000 mm long
* Container locks for 1x20’, extendable to approx. 2,820 mm, according to ISO 1496, EN 284 or EN 452
* 1 pair of aluminum ramps, load capacity per pair approx. 9,000 kg
* 4 stainless steel toolboxes between or behind the axles

Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.