Traktors

New Holland T 7.340 AUTO COMMAND HD PLM

T 7.340 AUTO COMMAND HD PLM
(0010) New Holland Tractor T 7.340 HD Auto Command New Generation
(0020) * Main and auxiliary fuel tank (601 liters) and AdBlue tank
(0030) (96 liters) without tank protection
(0040) * 250 A alternator
(0050) * Viscotronic fan & Engine Stage 5
(0060) * Glow plug system
(0070) * Without engine dust brake
(0080) * Germany configuration: Operating manual in German,
(0090) License plate holder on the rear roof, license plate holder
(0100) at the front, left-hand traffic, chock, speed stickers
Itjdozbntmjpfx Aqcsl
(0110) * EU/ISO country configuration
(0120) * Auto Command - continuously variable transmission 50 km/h ECO
(0130) * Fenders with controls on both sides (EHR, PTO, 1
(0140) configurable rear control valve, engine speed memory and
(0150) engine stop)
(0160) * Without additional PTO shaft stub 1 3/4", 20-piece
(0170) * 4-speed rear PTO shaft 540/540E/1,000/1,000E rpm with
(0180) electric speed switching, PTO shaft stub 6 teeth
(0190) mounted + 21 teeth (1 3/8") included
(0200) * Without ABS
(0210) * HD high-performance brake discs rear axle
(0220) * Electronic parking lock
(0230) * Preparation for steering system (preparation of the steering,
(0240) front axle, sensors, valves, wiring harness, antenna mount
(0250) on the roof) + variable steering ratio Custom Steer
(0260) * sprung and braked front axle CAT. 4.75
(0270) * Adjustable axle 2,490 mm (98")
(0280) * Electronic key and electronic start button
(0290) (immobilizer, electric door lock)
(0300) * 360 degree lighting package (14 LED spotlights in the roof, of
(0310) which 6 at the front and 8 at the rear)
(0320) * Rotating beacon on both sides + warning signs at the rear
(0330) (Warning signs are required for vehicles with an external width of 2.55 m or more)
(0340) * Axial piston variable pump with max. 220 l/min flow rate
(0350) * 5 rear control valves electronic (color-coded
(0360) and configurable)
(0370) * Without hydraulic switching valve block
(0380) * Extended joystick (up to 6 control valves can be assigned, 2 free
(0390) assignable buttons, forward and reverse button, driving mode switch)
(0400) * Without baler mode
(0410) * Power Beyond connection plate without couplings
(0420) * 2 mid-mount control valves electronic
(0430) * Rear linkage Cat.3 with 2 external lifting cylinders (120 mm),
(0440) quick-release hitch, ball hitch and hydraulic top link
(0450) * Automatic lower link stabilizers
(0460) * Front hydraulics with 2 additional lines to the front for
(0470) mid-mount control valves
(0480) * Front linkage management incl. electrical connections
(0490) at the front (7 and 3 pole socket 12V, 30A)
(0500) * Without additional front PTO shaft stub 1 3/8", 21-piece
(0510) * Automatic trailer hitch quickly adjustable in height,
(0520) pin 38 mm
(0530) * Drawbar HD with welded K 80 ball (two
(0540) positions: short = 4,000 Kg support load, long = 3,500 Kg support load)
(0550) * Compressed air system and two-line brake valve
(0560) * Intelligent trailer brake. The function enables a
(0570) targeted, automatic braking of the trailer when
(0580) the tractor's speed is reduced with
(0590) continuously variable transmission via the control lever/pedal. This
(0600) contributes to increased safety and accident prevention.
(0610) Only in conjunction with pneumatic trailer brake, radar
(0620) and Intelliview monitor.
(0630) * External compressed air connection (159cm2 compressor) with

Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.