Rullplatformas piekabe

HÜFFERMANN 3-A VARIO-CARRIER SAFETYFIX VERZINKT LiftAlufelg

WhatsApp:
NEW 3-AXLE VARIO-CARRIER TRAILER - "HÜFFERMANN" WITH SAFETYFIX
For the transport of skip containers according to DIN 30720
Total weight (permissible) 24 t (technical) 27 t
Frame length approx. 7,600 mm, for two skip containers up to 12 m3
Total width max. 2,550 mm
Container mounting height (in driving position) approx. 1,260 mm
Type HMA 2430, single-tire
Welded steel frame construction made of high-strength steel S700
Chassis for skip containers for front and rear loading
Combined load securing, lateral centering fix,
On the front side, each a pair of locking wedges with pendulum shoes
Stops for transporting a skip container in the center of gravity
Lateral on the frame, stop eyelets for lashing chains
Low-maintenance, sealed ball bearing swivel ring
1 pair of lashing points for a stacked skip container
Equipment for positioning a skip container in the payload center of gravity
Skip container securing Safetyfix for 2 skip containers
4 manual lever lashing devices with ratchet function
Length-adjustable chain suspension with a ring eye for angled lashing of the
skip container via the rear container - receiving bracket
4 steel sheet storage boxes for lashing chains, galvanized
Drawbar
Hjdpfx Aszt T Dmedtsfk
Extendable drawbar, 6 x 100 mm adjustable, with 40 mm DIN towing eye, straight
Towing eye, D-value 125 KN, for single-tire chassis
Drawbar retaining spring with tensioner
Truck coupling height from 720 mm to 920 mm
Drawbar pneumatically lowerable with manual lever lock, for loading the containers from the front
Drawbar length 1,800-2,400 mm
3x SAF Intradisc-B9 axles with disc brakes ø430 mm (22.5" disc),
Load capacity 9 t/axle, on-road version
Axle spacing 1,410 mm
Axle lift on 2nd axle, automatically raises and lowers depending on weight, with
forced lowering by activation via "3 x brakes"
6 tires 385/55 R 22.5, 160K, manufacturer GoodYear EQMAX T
6 aluminum rims 11.75 x 22.5, offset 120 mm, glossy,
Chrome-plated wheel nut caps
Braking system according to EC directives 71/320 or ECE R13
Two-line compressed air braking system
Braking system manufacturer Wabco
EBS system 4S3M, 1st + 3rd axle sensed
Electronic braking and stability system EBS-E and RSS or TEBS G2 and RSP
Spring brake parking brake on 2nd + 3rd axle
Aluminum air tank
Duomatic quick coupling
EBS/ABS connection cable with holder on the drawbar
Air suspension without lowering and lifting device
Automatic lowering device, trailer is automatically lowered when the air supply
from the truck is disconnected
SWIT - Schwarzmüller Intelligent Telematics
Weight recognition/axle load display via EBS-CAN bus signal for display on
display in the driver's cab
(Truck must be prepared accordingly, no calibrated scale)
Tire pressure monitoring according to ECE Directive 141, with pressure sensor in the wheels, for display in the driver's cab
Acoustic reversing warning system/warning signal, switched via reverse gear
24-volt lighting system according to ECE Directive R48
2 FULL-LED module tail lights "Aspöck EcoLED III"
2 LED position lights at the front
2 LED outline lights at the rear
Flashing LED side marker lights, controlled via the turn signal
LED license plate light
Connection cable with 15-pin plug
2 LED work spotlights, mounted left+right on the side guard, shining to the rear, for switch operation
2 additional LED reversing lights, mounted rear left+right
3rd LED brake light, on the center panel
Paint: Shot blasted, arc-welded galvanized, primed with epoxy

Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.