PašizgāzējsCheval Liberté Debon
Heckkipper 155x305cm 2,0t E-Pume
Pašizgāzējs
Cheval Liberté Debon
Heckkipper 155x305cm 2,0t E-Pume
Fiksēta cena plus PVN
3 655 €
(4 349 € bruto)
Ražošanas gads
2026
Stāvoklis
Jauns
(pilnībā funkcionāls)
Atrašanās vieta
Winsen (Luhe) 

Pamatdati
- Apzīmējums:
- Pašizgāzējs
- Ražotājs:
- Cheval Liberté Debon
- Modelis:
- Heckkipper 155x305cm 2,0t E-Pume
- Transportlīdzekļa numurs:
- 12311666
- Ražošanas gads:
- 2026
- Stāvoklis:
- jauns
- Funkcionalitāte:
- pilnībā funkcionāls
Cena un atrašanās vieta
Fiksēta cena plus PVN
3 655 €
(4 349 € bruto)
- Atrašanās vieta:
- Werner-Forßmann-Str. 60, 21423 Winsen Luhe, Deutschland

Zvanīt
Tehniskā informācija
- Tukšais svars:
- 530 kg
- Maksimālā kravnesība:
- 1 470 kg
- Kopējais svars:
- 2 000 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 3 050 mm
- Iekraušanas vietas platums:
- 1 550 mm
- Piekares sistēma:
- cits
Piedāvājuma informācija
- Sludinājuma ID:
- A828-36-86
- Atsauces numurs:
- 20547362
- Atjaunināšana:
- pēdējo reizi 14.01.2026
Apraksts
Product information "Debon tipper trailer DK 155x305cm 2.0t | Electric pump | Special offer"
Tipper trailer with electric pump
The DK tipping trailer is an exceptionally practical and safe two-axle car trailer made of aluminum. The generous loading area measures 3.05 x 1.55 meters and can be positioned particularly flexibly for unloading in this rear-tipping trailer. The folding side walls are 30 centimeters high.
With an unladen weight of 530 kilograms, the tipping trailer can be loaded with a payload of up to 1,470 kilograms. The front wall facing the towing vehicle is extra high. The wooden floor panel in this rear-tipping trailer is covered with a steel sheet. The floor frame profile is equipped with six lashing eyes.
Convenience is a priority
An electric pump can be used to tilt the loading area to the rear. An overrun brake ensures that the towing vehicle is not pushed forward by the load when stopping or on a slope. All load-bearing steel frame parts are hot-dip galvanized.
Optionally, a 60-centimeter-high mesh extension can be supplied if required.
Special features
Double-walled, anodized aluminum side walls
Rear tipper with electric pump + battery
Heavy-duty support wheel
Additional features
Side walls: removable, foldable
Floor panel: sturdy screen-printed floor / steel sheet floor on the floor panel
Axle and drawbar completely hot-dip galvanized
6 tie-down points in the floor
12-volt electrical system, 13-pin connector with reversing light
Nedpfx Asi R Hvhomfocu
Frame welded and completely hot-dip galvanized.
Other
Vehicle registration document / registration certificate part 2
Accessories available at an extra charge - see below
If you would like to purchase this trailer or have further questions about trailers, please use our internal tipping trailer "No. 1666".
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Tipper trailer with electric pump
The DK tipping trailer is an exceptionally practical and safe two-axle car trailer made of aluminum. The generous loading area measures 3.05 x 1.55 meters and can be positioned particularly flexibly for unloading in this rear-tipping trailer. The folding side walls are 30 centimeters high.
With an unladen weight of 530 kilograms, the tipping trailer can be loaded with a payload of up to 1,470 kilograms. The front wall facing the towing vehicle is extra high. The wooden floor panel in this rear-tipping trailer is covered with a steel sheet. The floor frame profile is equipped with six lashing eyes.
Convenience is a priority
An electric pump can be used to tilt the loading area to the rear. An overrun brake ensures that the towing vehicle is not pushed forward by the load when stopping or on a slope. All load-bearing steel frame parts are hot-dip galvanized.
Optionally, a 60-centimeter-high mesh extension can be supplied if required.
Special features
Double-walled, anodized aluminum side walls
Rear tipper with electric pump + battery
Heavy-duty support wheel
Additional features
Side walls: removable, foldable
Floor panel: sturdy screen-printed floor / steel sheet floor on the floor panel
Axle and drawbar completely hot-dip galvanized
6 tie-down points in the floor
12-volt electrical system, 13-pin connector with reversing light
Nedpfx Asi R Hvhomfocu
Frame welded and completely hot-dip galvanized.
Other
Vehicle registration document / registration certificate part 2
Accessories available at an extra charge - see below
If you would like to purchase this trailer or have further questions about trailers, please use our internal tipping trailer "No. 1666".
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2004
25 Sludinājumi tiešsaistē
Nosūtīt pieprasījumu
Tālrunis & Fakss
+49 4171 ... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Gera
1 055 km
Pašizgāzējs 3 puses
SarisK1 276 150 2000 Kipper Rückwärtskipper
SarisK1 276 150 2000 Kipper Rückwärtskipper
Mazā sludinājuma
Nieder-Olm
1 333 km
Automašīnas piekabe
NeptunNordica 1300kg 2,63x1,45x0,40m GN156
NeptunNordica 1300kg 2,63x1,45x0,40m GN156
Mazā sludinājuma
Nieder-Olm
1 333 km
Pašizgāzēja piekabe
NeptunRückwärtskipper 2,56×1,48m 2700kg GN251
NeptunRückwärtskipper 2,56×1,48m 2700kg GN251
Mazā sludinājuma
Gera
1 055 km
Pašizgāzējs 3 puses
SarisK1 306 170 2700 2 Rückwärtskipper
SarisK1 306 170 2700 2 Rückwärtskipper
Mazā sludinājuma
Winsen (Luhe)
994 km
Lopkopības piekabe
Ifor Williams ViehanhängerTA510 14x6 178x434cm Höhe:183cm 3,5t
Ifor Williams ViehanhängerTA510 14x6 178x434cm Höhe:183cm 3,5t
Mazā sludinājuma
Oelsnitz/Vogtl.
1 087 km
Trīsvienīga pašizgāzēja piekabe
NEPTUNKipper N27-256-2
NEPTUNKipper N27-256-2
Mazā sludinājuma
Winsen (Luhe)
994 km
Liellopu pārvadāšanas kravas automašīna
Ifor Williams Viehanhänger TA51014x7 178x434cm Höhe:213 3,5t|Doppelstock
Ifor Williams Viehanhänger TA51014x7 178x434cm Höhe:213 3,5t|Doppelstock
Mazā sludinājuma
Grevenbroich
1 332 km
Automašīnas piekabe
EduardPritschenanhänger Tandem 2000kg 250x145x30cm
EduardPritschenanhänger Tandem 2000kg 250x145x30cm
Mazā sludinājuma
Winsen (Luhe)
994 km
Pašizgāzējs
Cheval Liberté Debon 155x305cm2,0t E-Pumpe Gitter 60cm AKTION
Cheval Liberté Debon 155x305cm2,0t E-Pumpe Gitter 60cm AKTION
Mazā sludinājuma
Neu-Ulm
1 360 km
Motociklu piekabe
Lorries Motorradanhänger MT-1, 0,75 to. 245 x 99 cm, Alu-Felgen
Lorries Motorradanhänger MT-1, 0,75 to. 245 x 99 cm, Alu-Felgen
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda
































































































































































