Zems iekrāvējsHumbaur
Humbaur 21 to Tandem Tieflader 7,2 m Luftfed.&Liftachse HBTZ 217224 BS
Zems iekrāvējs
Humbaur
Humbaur 21 to Tandem Tieflader 7,2 m Luftfed.&Liftachse HBTZ 217224 BS
fiksēta cena bez PVN
30 074 €
(35 788 € bruto)
Stāvoklis
Jauns
Atrašanās vieta
Kaltenkirchen 

Rādīt attēlus
Rādīt karti
Pamatdati
Cena un atrašanās vieta
fiksēta cena bez PVN
30 074 €
(35 788 € bruto)
- Atrašanās vieta:
- Hans-Stockmar-Str. 24, 24568 Kaltenkirchen, Deutschland

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 16 200 kg
- Kopējais svars:
- 21 000 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 7 250 mm
- Iekraušanas vietas platums:
- 2 540 mm
- Piekares sistēma:
- gaiss
- Riepas izmērs:
- 235/75 r17,5
- Aprīkojums:
- ABS, piekabes sakabe
Piedāvājuma informācija
- Ieraksta ID:
- A877-76-18
- Atsauces Nr.:
- 20624236
- Pēdējoreiz atjaunots:
- 07.2.2460714
Apraksts
HUMBAUR 21 to tandem low-loader drive-over trailer with rear bevel and folding steel ramps, Typ. HBTZ 217224 BS
---
---
INCLUSIVE SAF air suspension with raise/lower function
INCLUSIVE central axle lift on 1st axle
INCLUSIVE galvanized 400 mm high solid steel bulkhead
INCLUSIVE protected rear lights recessed in the end beam
INCLUSIVE reinforced drawbar height adjustment by means of a spindle
HOT-DIP GALVANIZED CHASSIS/DRAWBAR
Equipment:
* Permissible total weight 21,000 kg
* Payload approx. 16,200 kg
* Loading area approx. 7,250 x 2,540 mm
* Unloaded loading height approx. 870 mm due to wheel wells
* Overall dimensions: LxWxH approx. 9,400 x 2,550 x 3,710 mm
* Galvanized 400 mm high solid steel bulkhead
* Loading area slanted at the rear
* Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm) with spring lifting mechanism for each ramp
* Approx. 13° drive-on angle
* Reinforced, infinitely variable drawbar height adjustment for coupling heights of approx. 750 - 1,000 mm
* DIN screw-type drawbar eye Ø 50 mm
* Reinforced 12 t gear support winch with load and fast gear
* Climbing rails welded to the drive-on slope
* 8 10 t lashing rings countersunk
* 16 2 t drop lashing brackets can be lowered into the outer frame
* 2 telescopic folding supports at the rear of the vehicle
* 2-circuit air brake system with ALB function
* EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection;
* Spring-loaded parking brake
* Steel mudguards, hot-dip galvanized
Podpfx Ajkn N Rwodvjrd
* Floor and ramps with softwood planks
* Chassis frame with towing tube hot-dip galvanized
* 235/75 R17.5 tires (8-ply)
* Electrical system: 15-pin 24 volt
* Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728
Your advantages:
* Optimum corrosion protection thanks to hot-dip galvanizing
* Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope
* Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters
* Ideal load securing options thanks to standard lashing options
* The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles
* Low tare weight => therefore high payload
---
Optional
* Hydraulic ramp hoist
∗Storage vehicle - promptly available
∗Subject to prior sale
∗Price ex works
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
---
---
INCLUSIVE SAF air suspension with raise/lower function
INCLUSIVE central axle lift on 1st axle
INCLUSIVE galvanized 400 mm high solid steel bulkhead
INCLUSIVE protected rear lights recessed in the end beam
INCLUSIVE reinforced drawbar height adjustment by means of a spindle
HOT-DIP GALVANIZED CHASSIS/DRAWBAR
Equipment:
* Permissible total weight 21,000 kg
* Payload approx. 16,200 kg
* Loading area approx. 7,250 x 2,540 mm
* Unloaded loading height approx. 870 mm due to wheel wells
* Overall dimensions: LxWxH approx. 9,400 x 2,550 x 3,710 mm
* Galvanized 400 mm high solid steel bulkhead
* Loading area slanted at the rear
* Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm) with spring lifting mechanism for each ramp
* Approx. 13° drive-on angle
* Reinforced, infinitely variable drawbar height adjustment for coupling heights of approx. 750 - 1,000 mm
* DIN screw-type drawbar eye Ø 50 mm
* Reinforced 12 t gear support winch with load and fast gear
* Climbing rails welded to the drive-on slope
* 8 10 t lashing rings countersunk
* 16 2 t drop lashing brackets can be lowered into the outer frame
* 2 telescopic folding supports at the rear of the vehicle
* 2-circuit air brake system with ALB function
* EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection;
* Spring-loaded parking brake
* Steel mudguards, hot-dip galvanized
Podpfx Ajkn N Rwodvjrd
* Floor and ramps with softwood planks
* Chassis frame with towing tube hot-dip galvanized
* 235/75 R17.5 tires (8-ply)
* Electrical system: 15-pin 24 volt
* Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728
Your advantages:
* Optimum corrosion protection thanks to hot-dip galvanizing
* Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope
* Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters
* Ideal load securing options thanks to standard lashing options
* The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles
* Low tare weight => therefore high payload
---
Optional
* Hydraulic ramp hoist
∗Storage vehicle - promptly available
∗Subject to prior sale
∗Price ex works
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2022
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 4191 ... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
mazā sludinājuma
Kaltenkirchen
984 km
Zems iekrāvējs
HumbaurHumbaur 21 to Tandem Tieflader 7,2 m Luftfed.&Liftachse HBTZ 217224 BS
HumbaurHumbaur 21 to Tandem Tieflader 7,2 m Luftfed.&Liftachse HBTZ 217224 BS
mazā sludinājuma
Gevelsberg
1 277 km
Zema kravnes piekabe
HUMBAURHBTZ 217224 Tandem-Tieflader verzinkt NEU
HUMBAURHBTZ 217224 Tandem-Tieflader verzinkt NEU
mazā sludinājuma
Paderborn
1 172 km
Izvelkamais konteiners
Monza10,4m³ - Doppelflügeltür
Monza10,4m³ - Doppelflügeltür
mazā sludinājuma
Nürnberg
1 219 km
Celtniecības tehnikas piekabe
BagelaKabelziehwinde KW 5010
BagelaKabelziehwinde KW 5010
mazā sludinājuma
Nürnberg
1 219 km
Celtniecības tehnikas piekabe
HumbaurHS 105020
HumbaurHS 105020
mazā sludinājuma
Beselich
1 296 km
Zemas iekrāvēja piekabes celtniecības tehnikai
MS DorseMS TL80-3
MS DorseMS TL80-3
mazā sludinājuma
Nürnberg
1 219 km
Celtniecības tehnikas piekabe
BagelaVermietung Hilfsseilwinde Bagela 30/11, Kabelwinde DOLLCO
BagelaVermietung Hilfsseilwinde Bagela 30/11, Kabelwinde DOLLCO
mazā sludinājuma
Schwebheim
1 219 km
Zema kravnes piekabe
MösleinTT 31 31 t GG Tridem- Tieflader 3 Achs, gelenktNeufahrzeug
MösleinTT 31 31 t GG Tridem- Tieflader 3 Achs, gelenktNeufahrzeug
mazā sludinājuma
Triptis
1 076 km
Zems iekrāvējs
FlieglTTS 100
FlieglTTS 100
mazā sludinājuma
Schwebheim
1 219 km
Zema kravnes piekabe
MösleinTT21- 7,2 21 t Tandemtieflader, Luftgefedert, NEU
MösleinTT21- 7,2 21 t Tandemtieflader, Luftgefedert, NEU
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda









































































































