Zems iekrāvējsHumbaur
HUMBAUR 21 to Tandemtiefl HBTZ 217224 BS
Zems iekrāvējs
Humbaur
HUMBAUR 21 to Tandemtiefl HBTZ 217224 BS
fiksēta cena bez PVN
30 074 €
(35 788 € bruto)
Stāvoklis
Jauns
Atrašanās vieta
Kaltenkirchen 

Rādīt attēlus
Rādīt karti
Pamatdati
Cena un atrašanās vieta
fiksēta cena bez PVN
30 074 €
(35 788 € bruto)
- Atrašanās vieta:
- Hans-Stockmar-Str. 24, 24568 Kaltenkirchen, DE
Zvanīt
Tehniskā informācija
- Kopējais svars:
- 21 000 kg
- Maksimālā kravnesība:
- 16 400 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 7 200 mm
- Iekraušanas vietas platums:
- 2 540 mm
- Piekares sistēma:
- pilnīga pneimatiskā piekare
- Riepas izmērs:
- 235/75 r17,5
- Aprīkojums:
- ABS, piekabes sakabe
Piedāvājuma informācija
- Ieraksta ID:
- A877-76-51
- Atsauces Nr.:
- 20624235
- Pēdējoreiz atjaunots:
- 07.2.2460714
Apraksts
HUMBAUR 21 to tandem low loader drive-over with rear bevel and folding steel ramps, Typ. HBTZ 217224 BS
---
Gjdpfx Agjkn N Sxs Reuh
---
INCLUSIVE SAF air suspension with raise/lower function
INCLUSIVE central axle lift on 1st axle
INCLUSIVE galvanized 400 mm high solid steel bulkhead
INCLUSIVE protected rear lights recessed in the end beam
INCLUSIVE reinforced drawbar height adjustment by means of a spindle
HOT-DIP GALVANIZED CHASSIS/DRAWBAR
Equipment:
* Permissible total weight 21,000 kg
* Payload approx. 16,400 kg
* Loading area approx. 7,200 x 2,540 mm
* Unloaded loading height approx. 870 mm due to wheel wells
* Overall dimensions: LxWxH approx. 8,700 x 2,550 x 3,710 mm
* Galvanized 400 mm high solid steel bulkhead
* Loading area slanted at the rear
* Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm)
* Spring jack as standard (hydraulic ramp jack at extra cost)
* Approx. 13° drive-on angle
* Reinforced infinitely variable drawbar height adjustment for coupling heights unbel. approx. 750 - 1,000 mm
* DIN screw-type towing eye Ø 50 mm
* Reinforced 12 t gear support winch with load and fast gear
* Climbing rails welded to the drive-on slope
* 8 10 t lashing rings countersunk
* 16 2 t drop lashing brackets can be lowered into the outer frame
* 2 telescopic folding supports at the rear of the vehicle
* 2-circuit air brake system with ALB function
* EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection;
* Spring-loaded parking brake
* Steel mudguards, hot-dip galvanized
* Floor and ramps with softwood planks
* Chassis frame with towing tube hot-dip galvanized
* 235/75 R17.5 tires (8-wheel)
* Electrical system: 15-pin 24 volt
* Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728
Your advantages:
* Optimum corrosion protection thanks to hot-dip galvanizing
* Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope
* Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters
* Ideal load securing options thanks to standard lashing options
* The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles
* Low tare weight => therefore high payload
---
Optional
* Hydraulic ramp hoist
∗Storage vehicle - promptly available
∗Subject to prior sale
∗Price ex works
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
---
Gjdpfx Agjkn N Sxs Reuh
---
INCLUSIVE SAF air suspension with raise/lower function
INCLUSIVE central axle lift on 1st axle
INCLUSIVE galvanized 400 mm high solid steel bulkhead
INCLUSIVE protected rear lights recessed in the end beam
INCLUSIVE reinforced drawbar height adjustment by means of a spindle
HOT-DIP GALVANIZED CHASSIS/DRAWBAR
Equipment:
* Permissible total weight 21,000 kg
* Payload approx. 16,400 kg
* Loading area approx. 7,200 x 2,540 mm
* Unloaded loading height approx. 870 mm due to wheel wells
* Overall dimensions: LxWxH approx. 8,700 x 2,550 x 3,710 mm
* Galvanized 400 mm high solid steel bulkhead
* Loading area slanted at the rear
* Drive-on ramps with wooden decking, can be moved sideways (approx. 3,100 x 760 mm)
* Spring jack as standard (hydraulic ramp jack at extra cost)
* Approx. 13° drive-on angle
* Reinforced infinitely variable drawbar height adjustment for coupling heights unbel. approx. 750 - 1,000 mm
* DIN screw-type towing eye Ø 50 mm
* Reinforced 12 t gear support winch with load and fast gear
* Climbing rails welded to the drive-on slope
* 8 10 t lashing rings countersunk
* 16 2 t drop lashing brackets can be lowered into the outer frame
* 2 telescopic folding supports at the rear of the vehicle
* 2-circuit air brake system with ALB function
* EBS brake system 24 volt with EBS plug-in connection ISO 7638;Note: towing vehicle must have ABS/EBS connection;
* Spring-loaded parking brake
* Steel mudguards, hot-dip galvanized
* Floor and ramps with softwood planks
* Chassis frame with towing tube hot-dip galvanized
* 235/75 R17.5 tires (8-wheel)
* Electrical system: 15-pin 24 volt
* Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728
Your advantages:
* Optimum corrosion protection thanks to hot-dip galvanizing
* Safe loading and unloading thanks to telescopic folding supports at the rear and climbing rails on the ramp slope
* Simple and easy handling of the steel drive-on ramps thanks to the ramp lifters
* Ideal load securing options thanks to standard lashing options
* The reinforced, infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles
* Low tare weight => therefore high payload
---
Optional
* Hydraulic ramp hoist
∗Storage vehicle - promptly available
∗Subject to prior sale
∗Price ex works
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2022
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 4191 ... sludinājumi
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda