Zema kravnes piekabeMÜLLER-MITTELTAL
Tandemtieflader, Lufrfederung, Gitterrostrampen
Zema kravnes piekabe
MÜLLER-MITTELTAL
Tandemtieflader, Lufrfederung, Gitterrostrampen
Fiksēta cena plus PVN
32 650 €
(38 854 € bruto)
Ražošanas gads
2026
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Pamatdati
Cena un atrašanās vieta
Fiksēta cena plus PVN
32 650 €
(38 854 € bruto)
- Pārdevēja atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Vācija

Zvanīt
Tehniskā informācija
Izmēri un svars
Kopējais svars:
14 400 kg
Maksimālā kravnesība:
10 500 kg
Krautuves garums:
7 000 mm
Iekraušanas vietas platums:
2 470 mm
Iekraušanas telpas augstums:
400 mm
Asis un riteņi
Asu konfigurācija:
2 asis
Piedāvājuma informācija
- Sludinājuma ID:
- A104-26-931
- Atsauces numurs:
- 6285
- Atjaunināšana:
- pēdējo reizi 29.10.2026
Apraksts
* ETÜ - TA - R 14.4
----Brakes:
* EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 ton Gigant axles
----Suspension:
* Air suspension with lifting and lowering system
----Drawbar / Flange coupling:
* Drawbar adjustable in height by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange coupling
----Electrical system / Lighting:
* Tire pressure monitoring system with display option in the truck via EBS signal - without truck-side installation
* 15-pin power connector
* LED lighting
----General components:
* Front support winch
* Outboard folding supports at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm at the front right, outside on the front panel
* Side impact protection
* Plastic quarter fenders
----Loading area:
* 50 mm hardwood floor
* Provision for retrofitting 20" container locking devices in front of the front panel and at the rear
* Screwed front panel made of smooth sheet metal
* Steel side walls - trapezoid profiled - foldable, divided in the middle 1x
* Steel rear wall can be slid in between the ramps, bracket for storage when not in use inside in front of the front panel
* Rear crossbars screwed on
----Load securing:
* Perforated outer frame, angled approx. 45 degrees, with 2-ton lashing force every 480 mm
* Installation of 3-ton drop-side lashing eyes every 600 mm possible - 4 lashing eyes installed on each side
* 1 x 6.3-ton lashing eye in each corner at the front and rear
* Profifix lashing rail in the longitudinal axis in the middle for lashing options up to LC 3000 daN
* Various holes in the front and end beams for 1.2-ton lashing options
----Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Approach angle at the rear approx. 860 mm
Isdpjl Thvxsfx Aarsbd
----Painting:
* Chassis, drawbar, front panel, rear gate, folding supports, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange coupling, and support winch painted in a black tone
* Side panels in RAL 9010 pure white
----Information:
* --reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer's warranty
* Errors and prior sale reserved
----Delivery time:
* Available for immediate delivery from Egestorf
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
----Brakes:
* EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 7 ton Gigant axles
----Suspension:
* Air suspension with lifting and lowering system
----Drawbar / Flange coupling:
* Drawbar adjustable in height by 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* 40 mm flange coupling
----Electrical system / Lighting:
* Tire pressure monitoring system with display option in the truck via EBS signal - without truck-side installation
* 15-pin power connector
* LED lighting
----General components:
* Front support winch
* Outboard folding supports at the rear
* Plastic toolbox approx. 858 x 500 x 500 mm at the front right, outside on the front panel
* Side impact protection
* Plastic quarter fenders
----Loading area:
* 50 mm hardwood floor
* Provision for retrofitting 20" container locking devices in front of the front panel and at the rear
* Screwed front panel made of smooth sheet metal
* Steel side walls - trapezoid profiled - foldable, divided in the middle 1x
* Steel rear wall can be slid in between the ramps, bracket for storage when not in use inside in front of the front panel
* Rear crossbars screwed on
----Load securing:
* Perforated outer frame, angled approx. 45 degrees, with 2-ton lashing force every 480 mm
* Installation of 3-ton drop-side lashing eyes every 600 mm possible - 4 lashing eyes installed on each side
* 1 x 6.3-ton lashing eye in each corner at the front and rear
* Profifix lashing rail in the longitudinal axis in the middle for lashing options up to LC 3000 daN
* Various holes in the front and end beams for 1.2-ton lashing options
----Ramps:
* One-piece mechanical grating ramps with spring mechanism for single-person operation approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Approach angle at the rear approx. 860 mm
Isdpjl Thvxsfx Aarsbd
----Painting:
* Chassis, drawbar, front panel, rear gate, folding supports, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange coupling, and support winch painted in a black tone
* Side panels in RAL 9010 pure white
----Information:
* --reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer's warranty
* Errors and prior sale reserved
----Delivery time:
* Available for immediate delivery from Egestorf
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
158 Sludinājumi tiešsaistē
Nosūtīt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Veiksmīgs
Jūsu ziņojums ir nosūtīts.
Mazā sludinājuma
Egestorf
1 012 km
Atvērtā piekabe
MÜLLER-MITTELTALTandemtieflader, Lufrfederung, Gitterrostrampen
MÜLLER-MITTELTALTandemtieflader, Lufrfederung, Gitterrostrampen
Veiksmīgs
Jūsu ziņojums ir nosūtīts.
Mazā sludinājuma
Legden
1 328 km
Atvērtā piekabe
2.Achs-Tandem AH Pritsche Bordwänden & Rungen
2.Achs-Tandem AH Pritsche Bordwänden & Rungen
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda























































































