Atvērtā piekabeMÜLLER-MITTELTAL
Tandemtieflader, Lufrfederung, Gitterrostrampen
Atvērtā piekabe
MÜLLER-MITTELTAL
Tandemtieflader, Lufrfederung, Gitterrostrampen
fiksēta cena bez PVN
29 900 €
(35 581 € bruto)
Izgatavošanas gads
2025
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Rādīt attēlus
Rādīt karti
Pamatdati
Cena un atrašanās vieta
fiksēta cena bez PVN
29 900 €
(35 581 € bruto)
- Pārdevēja atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Vācija

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 10 500 kg
- Kopējais svars:
- 14 400 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 7 000 mm
- Iekraušanas vietas platums:
- 2 470 mm
- Iekraušanas telpas augstums:
- 400 mm
Piedāvājuma informācija
- Ieraksta ID:
- A104-27-108
- Atsauces Nr.:
- 6285a
- Pēdējoreiz atjaunots:
- 08.7.2460865
Apraksts
* EBS (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lift and lowering system
* Drawbar height adjustable by approx. 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting
* Front landing gear
* Rear folding support legs, externally mounted
Kjdpfsl Th Dfjx Aggenf
* Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Provisions in front of the bulkhead and at the rear for retrofitting 20" container locks
* Bolted bulkhead made of smooth sheet metal
* Side walls made of trapezoid-profiled steel sheet, foldable, center-divided (1x)
* Rear wall made of steel, insertable between the ramps, storage bracket for non-use inside in front of the bulkhead
* Rear stanchions bolted
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing shackles possible every 600 mm – 4 lashing rings installed per side
* One 6.3 t lashing ring in each front and rear corner
* Various holes for 1.2 t lashing options in the bulkhead and end crossmember
* One-piece mechanical grating ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm)
* Rear approach slope approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding support legs, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange eye, and landing gear painted black
* Side wall color freely selectable up to approx. 2 weeks before production date; no metallic or special colors allowed
* --reinforced and certified body according to EN 12642 XL including load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available in Egestorf
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 7 t Gigant axles
* Air suspension with lift and lowering system
* Drawbar height adjustable by approx. 300 mm
* Drawbar extension by 250 mm to 2,250 mm
* Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required
* 15-pin power connector
* LED lighting
* Front landing gear
* Rear folding support legs, externally mounted
Kjdpfsl Th Dfjx Aggenf
* Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
* 50 mm softwood floor
* Provisions in front of the bulkhead and at the rear for retrofitting 20" container locks
* Bolted bulkhead made of smooth sheet metal
* Side walls made of trapezoid-profiled steel sheet, foldable, center-divided (1x)
* Rear wall made of steel, insertable between the ramps, storage bracket for non-use inside in front of the bulkhead
* Rear stanchions bolted
* Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm
* Installation of 3 t folding lashing shackles possible every 600 mm – 4 lashing rings installed per side
* One 6.3 t lashing ring in each front and rear corner
* Various holes for 1.2 t lashing options in the bulkhead and end crossmember
* One-piece mechanical grating ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm)
* Rear approach slope approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding support legs, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange eye, and landing gear painted black
* Side wall color freely selectable up to approx. 2 weeks before production date; no metallic or special colors allowed
* --reinforced and certified body according to EN 12642 XL including load securing certificate--
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
* Immediately available in Egestorf
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Egestorf
1 012 km
Zema kravnes piekabe
MÜLLER-MITTELTALTandemtieflader, Lufrfederung, Gitterrostrampen
MÜLLER-MITTELTALTandemtieflader, Lufrfederung, Gitterrostrampen
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda

















































