Zema kravnes piekabeMÜLLER-MITTELTAL
11,9 to Tandemkippanh. mit Agra vorbereitung
Zema kravnes piekabe
MÜLLER-MITTELTAL
11,9 to Tandemkippanh. mit Agra vorbereitung
Fiksēta cena plus PVN
27 900 €
(33 201 € bruto)
Ražošanas gads
2026
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Pamatdati
Cena un atrašanās vieta
Fiksēta cena plus PVN
27 900 €
(33 201 € bruto)
- Pārdevēja atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Vācija

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 8 650 kg
- Kopējais svars:
- 11 900 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 5 000 mm
- Iekraušanas vietas platums:
- 2 420 mm
- Iekraušanas telpas augstums:
- 500 mm
Piedāvājuma informācija
- Sludinājuma ID:
- A104-26-970
- Atsauces numurs:
- 61561
- Atjaunināšana:
- pēdējo reizi 04.07.2026
Apraksts
* KA-TA-R 11.9 Masterline
----Brakes:
* Wabco EBS
* Emergency release system for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 tons BPW axles
----Suspension:
* Parabolic springs with tandem equalizer
----Drawbar / Flange coupling:
* Height-adjustable drawbar by 300 mm with 40 mm flange coupling
----Electrical system / Lighting:
* TPMS tire pressure monitoring system
* Multivoltage
* 15-pin power connector
* 12 V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural towing vehicles
* LED tail lights
----General components:
* Mechanical support jack at the front
* 2 mechanical folding supports at the rear
* Plastic toolbox on the right side
* 2-step step on the front left side in the direction of travel
* Underrun protection, bolted
* Plastic quarter fenders
----Tipping body:
* Net hooks on the side and rear in the bearings of the central locking system, as well as 2 on the front wall
* Steel pallet-sided 3-way tipping body (continuous side walls - without center rails - foldable with side wall spring lifts, tailgate foldable and pivoting via manual central locking)
* 4 mm steel sheet floor
* Mounting rail at the rear for the loading ramps
----Load securing:
* 1 x 5 tons lashing point in each corner
* and 4 x 3 tons lashing points on each side, embedded in the outer frame
----Ramps:
* 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 tons / pair) suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the loading platform, embedded in the chassis at the rear
----Tires:
* Tire size 385/55 R 19.5
Dcsdpfx Ael Thw Ijiaei
----Paint finish:
* Chassis, drawbar, tipping body, front wall, folding supports and rear rails hot-dip galvanized
* Axles, springs, air tank, flange coupling and support jack painted in a black shade
* Painting of the side walls in a RAL color of your choice (however, no special or metallic paints); can be changed up to approx. 6 weeks before completion
----Information:
* Body reinforced with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale subject to change
----Delivery time:
* Available for immediate delivery from Egestorf
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
----Brakes:
* Wabco EBS
* Emergency release system for spring brake cylinders
* Drum brakes
----Axle:
* 2 x 5.5 tons BPW axles
----Suspension:
* Parabolic springs with tandem equalizer
----Drawbar / Flange coupling:
* Height-adjustable drawbar by 300 mm with 40 mm flange coupling
----Electrical system / Lighting:
* TPMS tire pressure monitoring system
* Multivoltage
* 15-pin power connector
* 12 V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural towing vehicles
* LED tail lights
----General components:
* Mechanical support jack at the front
* 2 mechanical folding supports at the rear
* Plastic toolbox on the right side
* 2-step step on the front left side in the direction of travel
* Underrun protection, bolted
* Plastic quarter fenders
----Tipping body:
* Net hooks on the side and rear in the bearings of the central locking system, as well as 2 on the front wall
* Steel pallet-sided 3-way tipping body (continuous side walls - without center rails - foldable with side wall spring lifts, tailgate foldable and pivoting via manual central locking)
* 4 mm steel sheet floor
* Mounting rail at the rear for the loading ramps
----Load securing:
* 1 x 5 tons lashing point in each corner
* and 4 x 3 tons lashing points on each side, embedded in the outer frame
----Ramps:
* 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 tons / pair) suitable for rubber-tired and tracked vehicles
* Lockable storage compartment under the loading platform, embedded in the chassis at the rear
----Tires:
* Tire size 385/55 R 19.5
Dcsdpfx Ael Thw Ijiaei
----Paint finish:
* Chassis, drawbar, tipping body, front wall, folding supports and rear rails hot-dip galvanized
* Axles, springs, air tank, flange coupling and support jack painted in a black shade
* Painting of the side walls in a RAL color of your choice (however, no special or metallic paints); can be changed up to approx. 6 weeks before completion
----Information:
* Body reinforced with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale subject to change
----Delivery time:
* Available for immediate delivery from Egestorf
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
171 Sludinājumi tiešsaistē
Nosūtīt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Egestorf
1 012 km
Trīspusējā pašizgāzēja piekabe
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Agra vorbereitung
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Agra vorbereitung
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda























































