Trīspusējā pašizgāzēja piekabeMÜLLER-MITTELTAL
11,9 to Tandemkippanh. mit Agra vorbereitung
Trīspusējā pašizgāzēja piekabe
MÜLLER-MITTELTAL
11,9 to Tandemkippanh. mit Agra vorbereitung
Fiksēta cena plus PVN
27 900 €
(33 201 € bruto)
Ražošanas gads
2026
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Pamatdati
- Apzīmējums:
- Trīspusējā pašizgāzēja piekabe
- Ražotājs:
- MÜLLER-MITTELTAL
- Ražošanas gads:
- 2026
- Stāvoklis:
- jauns
Cena un atrašanās vieta
Fiksēta cena plus PVN
27 900 €
(33 201 € bruto)
- Pārdevēja atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Vācija

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 8 650 kg
- Kopējais svars:
- 11 900 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 5 000 mm
- Iekraušanas vietas platums:
- 2 420 mm
- Iekraušanas telpas augstums:
- 500 mm
Piedāvājuma informācija
- Sludinājuma ID:
- A144-34-309
- Atsauces numurs:
- 6156
- Atjaunināšana:
- pēdējo reizi 24.07.2026
Apraksts
* KA-TA-R 11.9 Masterline
----Brakes:
* Wabco EBS
* Emergency release system for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 ton BPW axles
----Suspension:
* Parabolic springs with tandem equalizer
----Drawbar / Flange coupling:
* Height-adjustable drawbar by 300 mm with 40 mm flange coupling
----Electrical system / Lighting:
* TPMS tire pressure monitoring system
* Multivoltage
* 15-pin power connector
* 12 V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural tractors
* LED tail lights
----General components:
* Mechanical support winch at the front
* 2 mechanical folding supports at the rear
* Plastic tool box on the side, right
* 2-step step on the left side in the direction of travel at the front
* Underrun protection, bolted
* Plastic fender
----Tipping body:
* Lashing hooks on the side and rear in the bearings of the central locking system, as well as 2 pieces on the front wall
* Steel pallet-sided, 3-way tipping body (continuous side walls - without center rails - foldable with side board spring lifts, tailgate foldable and pivoting via manual central locking)
* 4 mm steel sheet floor
* Mounting rail at the rear for loading ramps
----Load securing:
* 1 x 5-ton lashing point in each corner
* As well as 4 x 3-ton lashing eyes on each side, embedded in the outer frame
----Ramps:
* 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 tons / pair), suitable for vehicles with rubber and chain tracks
* Lockable storage compartment at the rear below the loading area, integrated into the chassis
----Tires:
* Tire size 385/55 R 19.5
----Paintwork:
Bdsdpfx Ajq Euagjf Aef
* Chassis, drawbar, tipping body, front wall, folding supports, and rear frame hot-dip galvanized
* Axles, springs, air tank, flange coupling, and support winch painted in a black tone
* Painting of the side boards in RAL - 9010 pure white
----Information:
* Body reinforced with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale are subject to change
----Delivery time:
* Available for immediate delivery from Egestorf
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
----Brakes:
* Wabco EBS
* Emergency release system for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 5.5 ton BPW axles
----Suspension:
* Parabolic springs with tandem equalizer
----Drawbar / Flange coupling:
* Height-adjustable drawbar by 300 mm with 40 mm flange coupling
----Electrical system / Lighting:
* TPMS tire pressure monitoring system
* Multivoltage
* 15-pin power connector
* 12 V 13-pin auxiliary cable
* Extended connection cables for forestry and agricultural tractors
* LED tail lights
----General components:
* Mechanical support winch at the front
* 2 mechanical folding supports at the rear
* Plastic tool box on the side, right
* 2-step step on the left side in the direction of travel at the front
* Underrun protection, bolted
* Plastic fender
----Tipping body:
* Lashing hooks on the side and rear in the bearings of the central locking system, as well as 2 pieces on the front wall
* Steel pallet-sided, 3-way tipping body (continuous side walls - without center rails - foldable with side board spring lifts, tailgate foldable and pivoting via manual central locking)
* 4 mm steel sheet floor
* Mounting rail at the rear for loading ramps
----Load securing:
* 1 x 5-ton lashing point in each corner
* As well as 4 x 3-ton lashing eyes on each side, embedded in the outer frame
----Ramps:
* 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 tons / pair), suitable for vehicles with rubber and chain tracks
* Lockable storage compartment at the rear below the loading area, integrated into the chassis
----Tires:
* Tire size 385/55 R 19.5
----Paintwork:
Bdsdpfx Ajq Euagjf Aef
* Chassis, drawbar, tipping body, front wall, folding supports, and rear frame hot-dip galvanized
* Axles, springs, air tank, flange coupling, and support winch painted in a black tone
* Painting of the side boards in RAL - 9010 pure white
----Information:
* Body reinforced with load securing certificate according to EN 12642 XL
* New vehicle with manufacturer's warranty
* Errors and prior sale are subject to change
----Delivery time:
* Available for immediate delivery from Egestorf
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
171 Sludinājumi tiešsaistē
Nosūtīt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Egestorf
1 012 km
Zema kravnes piekabe
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Agra vorbereitung
MÜLLER-MITTELTAL11,9 to Tandemkippanh. mit Agra vorbereitung
Mazā sludinājuma
Egestorf
1 012 km
Zema profila puspiekabe
MÜLLER-MITTELTAL3-achs mit Radmulden, 2 Ladehöhen, Klapprampen
MÜLLER-MITTELTAL3-achs mit Radmulden, 2 Ladehöhen, Klapprampen
Mazā sludinājuma
Egestorf
1 012 km
Zema profila puspiekabe
MÜLLER-MITTELTALachs leichtbauweise, Radmulden, Alu- Rampen
MÜLLER-MITTELTALachs leichtbauweise, Radmulden, Alu- Rampen
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda





























































































































