Zema kravnes piekabeMÜLLER-MITTELTAL
19 to luftgef. Tandemtiefl. mit Einschubrampen
Zema kravnes piekabe
MÜLLER-MITTELTAL
19 to luftgef. Tandemtiefl. mit Einschubrampen
fiksēta cena bez PVN
35 900 €
(42 721 € bruto)
Izgatavošanas gads
2025
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Rādīt attēlus
Rādīt karti
Pamatdati
Cena un atrašanās vieta
fiksēta cena bez PVN
35 900 €
(42 721 € bruto)
- Pārdevēja atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Vācija

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 14 400 kg
- Kopējais svars:
- 19 000 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 6 270 mm
- Iekraušanas vietas platums:
- 2 470 mm
- Iekraušanas telpas augstums:
- 400 mm
Piedāvājuma informācija
- Ieraksta ID:
- A107-45-933
- Atsauces Nr.:
- 6160
- Pēdējoreiz atjaunots:
- 08.1.2461049
Apraksts
* ETÜ-TA-ER 19.0:
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 ton Gigant axles
* Air suspension with lifting and lowering system
* Drawbar with 50 mm flange eye and height adjustment of 110 mm via offset plate
* Jost landing gear at the front
* External folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side
* Side underrun protection
* Plastic quarter mudguards
Bodpfxomi Tcqs Afpswh
* 15-pin electrical connector
* Multi-chamber tail lights
* Reinforcement package on the chassis for drill rig transport
* 50 mm softwood floor, clamped design
* Fixture for retrofitting container locks in front of the bulkhead
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of trapezoidal-profiled steel sheet, foldable with a central folding stanchion
* Steel rear wall, retractable between the ramps – storage holder inside in front of the bulkhead when not in use
* Rear stanchions bolted
* Perforated outer frame, angled approx. 45 degrees, with 2 ton lashing capacity every 480 mm
* Option to install 3 ton drop lashing rings every 600 mm
* Load securing package: in each corner at the front and rear, 1 x 10 ton UVV lashing ring; on each side, 2 x 8 ton UVV recessed lashing rings in the outer frame; various holes in the bulkhead and end crossmember for 1.2 ton lashing options
* One-piece slide-in ramps, 12 t/pair of ramps, approx. 2,750 x 620 mm
* Rear approach angle approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized
* ---Axles, air reservoir, flange towing eye, and landing gear painted in black---
* Unloaded loading height approx. 940 mm
* Loaded loading height approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer warranty
* Errors and prior sale excepted
* Available immediately from Egestorf
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
* Wabco EBS-E (electronic braking system)
* RDÜ tire pressure monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 ton Gigant axles
* Air suspension with lifting and lowering system
* Drawbar with 50 mm flange eye and height adjustment of 110 mm via offset plate
* Jost landing gear at the front
* External folding supports at the rear
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side
* Side underrun protection
* Plastic quarter mudguards
Bodpfxomi Tcqs Afpswh
* 15-pin electrical connector
* Multi-chamber tail lights
* Reinforcement package on the chassis for drill rig transport
* 50 mm softwood floor, clamped design
* Fixture for retrofitting container locks in front of the bulkhead
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of trapezoidal-profiled steel sheet, foldable with a central folding stanchion
* Steel rear wall, retractable between the ramps – storage holder inside in front of the bulkhead when not in use
* Rear stanchions bolted
* Perforated outer frame, angled approx. 45 degrees, with 2 ton lashing capacity every 480 mm
* Option to install 3 ton drop lashing rings every 600 mm
* Load securing package: in each corner at the front and rear, 1 x 10 ton UVV lashing ring; on each side, 2 x 8 ton UVV recessed lashing rings in the outer frame; various holes in the bulkhead and end crossmember for 1.2 ton lashing options
* One-piece slide-in ramps, 12 t/pair of ramps, approx. 2,750 x 620 mm
* Rear approach angle approx. 860 mm
* Chassis, drawbar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized
* ---Axles, air reservoir, flange towing eye, and landing gear painted in black---
* Unloaded loading height approx. 940 mm
* Loaded loading height approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer warranty
* Errors and prior sale excepted
* Available immediately from Egestorf
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Egestorf
1 011 km
Piekabe ar darba platformu
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
Mazā sludinājuma
Gralla
1 280 km
Zema kravnes piekabe
Fliegl3achs Tieflader Anhänger DTS-S 300 mit Kröpfung
Fliegl3achs Tieflader Anhänger DTS-S 300 mit Kröpfung
Mazā sludinājuma
Bovenden
1 118 km
Zema kravnes piekabe
Müller-MitteltalT 3 Kompakt 30,0, Hydr. Rampen, Verbr. auf 3m
Müller-MitteltalT 3 Kompakt 30,0, Hydr. Rampen, Verbr. auf 3m
Mazā sludinājuma
Lemgo-Lieme
1 151 km
Atvērtā piekabe
PAVICBPA 18 64ZC Drehschemel Containerpritsche NEU
PAVICBPA 18 64ZC Drehschemel Containerpritsche NEU
Mazā sludinājuma
Egestorf
1 012 km
Zema kravnes piekabe
MÜLLER-MITTELTALT4, Luftfed., hydr. Klapprampe, Baggerstiel.
MÜLLER-MITTELTALT4, Luftfed., hydr. Klapprampe, Baggerstiel.
Mazā sludinājuma
Triptis
1 076 km
Zems iekrāvējs
FlieglDTS 300 P
FlieglDTS 300 P
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda























































































































