Piekabe ar darba platformuMÜLLER-MITTELTAL
19 to luftgef. Tandemtiefl. mit Einschubrampen
Piekabe ar darba platformu
MÜLLER-MITTELTAL
19 to luftgef. Tandemtiefl. mit Einschubrampen
fiksēta cena bez PVN
35 900 €
(42 721 € bruto)
Izgatavošanas gads
2025
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Rādīt attēlus
Rādīt karti
Pamatdati
- Apzīmējums:
- Piekabe ar darba platformu
- Ražotājs:
- MÜLLER-MITTELTAL
- Izgatavošanas gads:
- 2025
- Stāvoklis:
- jauns
Cena un atrašanās vieta
fiksēta cena bez PVN
35 900 €
(42 721 € bruto)
- Atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Deutschland

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 14 400 kg
- Kopējais svars:
- 19 000 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 6 270 mm
- Iekraušanas vietas platums:
- 2 470 mm
- Iekraušanas telpas augstums:
- 400 mm
Piedāvājuma informācija
- Ieraksta ID:
- A107-46-176
- Atsauces Nr.:
- 61601
- Pēdējoreiz atjaunots:
- 08.1.2461049
Apraksts
* ETÜ-TA-ER 19.0:
* Wabco EBS-E (electronic braking system)
* RDÜ tire monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lifting and lowering device
* Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm using offset plate
* Jost front landing gear
* Outward folding rear supports
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
* Side underrun protection
Djdemi Tmajpfx Aaxecc
* Plastic quarter mudguards
* 15-pin electric connector
* Multi-chamber tail lights
* Reinforcement package for drill rig transport on the chassis
* 50 mm softwood floor, clamped design
* Fixture in front of the bulkhead for subsequent installation of container locks
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of trapezoidal-profiled steel sheet, fold-down with fold-down stanchion in the center
* Steel rear wall, slidable between ramps – storage bracket inside in front of bulkhead when not in use
* Rear posts bolted
* Perforated outer frame bent at approximately 45 degrees with 2 t lashing capacity every 480 mm
* Installation of 3 t drop-forged lashing brackets every 600 mm possible
* Lashing package: In each front and rear corner 1 x 10 t UVV lashing ring, on each side 2 x 8 t UVV retractable lashing rings in the outer frame, various holes in the bulkhead and rear cross-member for 1.2 t lashing options
* One-piece sliding ramps, 12 t/pair, approx. 2,750 x 620 mm
* Rear loading slope approx. 860 mm
* Chassis, drawbar, bulkhead, rear flap, folding supports, and drive-on ramps hot-dip galvanized
* --- Axles, air tank, flanged towing eye, and landing gear painted in black tone ---
* Unladen loading height approx. 940 mm
* Laden loading height approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Immediately available ex Egestorf
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
* Wabco EBS-E (electronic braking system)
* RDÜ tire monitoring system
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11 t Gigant axles
* Air suspension with lifting and lowering device
* Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm using offset plate
* Jost front landing gear
* Outward folding rear supports
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side
* Side underrun protection
Djdemi Tmajpfx Aaxecc
* Plastic quarter mudguards
* 15-pin electric connector
* Multi-chamber tail lights
* Reinforcement package for drill rig transport on the chassis
* 50 mm softwood floor, clamped design
* Fixture in front of the bulkhead for subsequent installation of container locks
* Bolted bulkhead made of smooth sheet metal
* Split side walls made of trapezoidal-profiled steel sheet, fold-down with fold-down stanchion in the center
* Steel rear wall, slidable between ramps – storage bracket inside in front of bulkhead when not in use
* Rear posts bolted
* Perforated outer frame bent at approximately 45 degrees with 2 t lashing capacity every 480 mm
* Installation of 3 t drop-forged lashing brackets every 600 mm possible
* Lashing package: In each front and rear corner 1 x 10 t UVV lashing ring, on each side 2 x 8 t UVV retractable lashing rings in the outer frame, various holes in the bulkhead and rear cross-member for 1.2 t lashing options
* One-piece sliding ramps, 12 t/pair, approx. 2,750 x 620 mm
* Rear loading slope approx. 860 mm
* Chassis, drawbar, bulkhead, rear flap, folding supports, and drive-on ramps hot-dip galvanized
* --- Axles, air tank, flanged towing eye, and landing gear painted in black tone ---
* Unladen loading height approx. 940 mm
* Laden loading height approx. 910 mm
* Wheelbase: 1,810 mm
* Tires: 235/75R17.5
* Vehicle is hot-dip galvanized
* New vehicle with manufacturer’s warranty
* Errors and prior sale excepted
* Immediately available ex Egestorf
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Egestorf
1 012 km
Zema kravnes piekabe
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
MÜLLER-MITTELTAL19 to luftgef. Tandemtiefl. mit Einschubrampen
Mazā sludinājuma
Twist
1 209 km
Maināms šasijas piekabe
WEB-TRAILERWechselanhänger 235/75 R17.5 / 970 - 1220mm
WEB-TRAILERWechselanhänger 235/75 R17.5 / 970 - 1220mm
Mazā sludinājuma
Schwebheim
1 219 km
Zema kravnes piekabe
ObermaierOS2-TUE135S 13,5 t Tandemtieflader
ObermaierOS2-TUE135S 13,5 t Tandemtieflader
Mazā sludinājuma
Egestorf
1 012 km
Rullplatformas piekabe
MÜLLER-MITTELTAL18 t. Kombi Abroller Absetzer Tieflader, Luft
MÜLLER-MITTELTAL18 t. Kombi Abroller Absetzer Tieflader, Luft
Mazā sludinājuma
Sittensen
1 039 km
Lielapjoma vilcējs
MAN18.580 TGX LL XXL 4x2, Hydr., Intarder, Klima
MAN18.580 TGX LL XXL 4x2, Hydr., Intarder, Klima
Mazā sludinājuma
Egestorf
1 011 km
Piekabe ar darba platformu
MÜLLER-MITTELTAL14,4 to. Tiefl. , luftgefedert - Einschubrampen
MÜLLER-MITTELTAL14,4 to. Tiefl. , luftgefedert - Einschubrampen
Mazā sludinājuma
Egestorf
1 012 km
Zema kravnes piekabe
MÜLLER-MITTELTAL18 t. Kombi Abroller Absetzer Tieflader, Luft
MÜLLER-MITTELTAL18 t. Kombi Abroller Absetzer Tieflader, Luft
Mazā sludinājuma
Kaltenkirchen
984 km
Zems iekrāvējs
HumbaurHumbaur 11,9 t Tandem-Tieflader | ALU-BW | Rampenschacht HBT 106224 BE (Bohlen einschiebbar)
HumbaurHumbaur 11,9 t Tandem-Tieflader | ALU-BW | Rampenschacht HBT 106224 BE (Bohlen einschiebbar)
Mazā sludinājuma
Schwebheim
1 219 km
Zema kravnes piekabe
MösleinTTT-11 6,20 Orange Neuer Tandemtieflader
MösleinTTT-11 6,20 Orange Neuer Tandemtieflader
Mazā sludinājuma
Schwebheim
1 219 km
Zema kravnes piekabe
MösleinTT 21-6,5 21 t Tandemtieflader, Luftgefedert, NEU
MösleinTT 21-6,5 21 t Tandemtieflader, Luftgefedert, NEU
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda























































































































































































