Piekabe ar darba platformuMÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit Auffahrrampen
Piekabe ar darba platformu
MÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit Auffahrrampen
Fiksēta cena plus PVN
32 950 €
(39 210 € bruto)
Ražošanas gads
2024
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Pamatdati
- Apzīmējums:
- Piekabe ar darba platformu
- Ražotājs:
- MÜLLER-MITTELTAL
- Ražošanas gads:
- 2024
- Stāvoklis:
- jauns
Cena un atrašanās vieta
Fiksēta cena plus PVN
32 950 €
(39 210 € bruto)
- Atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Deutschland

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 14 550 kg
- Kopējais svars:
- 19 000 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 6 270 mm
- Iekraušanas vietas platums:
- 2 470 mm
- Iekraušanas telpas augstums:
- 400 mm
Piedāvājuma informācija
- Sludinājuma ID:
- A128-69-369
- Atsauces numurs:
- 59541
- Atjaunināšana:
- pēdējo reizi 26.06.2026
Apraksts
ETÜ-TA-R 19.0
---- Brakes:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
Njdpfx Amjpk D D Hefscu
---- Axles:
* 2 x 11 t Gigant axles
---- Suspension:
* Air suspension with manual lowering at the rear
---- Drawbar / Flange Drawbar Eye:
* Drawbar with 50 mm flanged tow eye and height-adjustable drawbar
---- Electrical / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* LED tail lights
---- General Attachments:
* Jost landing gear at the front
* External folding support legs at the rear
* Tool box made of galvanized steel sheet approx. 650 x 350 x 320 mm, mounted right side (black powder-coated)
* Side underrun protection
* Plastic quarter mudguards
---- Low Loader Platform:
* Reinforcement package for drilling rig transport on chassis - loading height + 20 mm
* 50 mm softwood floor in clamped design
* Provision in front of the front wall for retrofitting container locks
* Bolted front wall made of smooth sheet steel
* Side walls made of trapezoidal-profiled steel, foldable with tailgate spring assist
* Rear steel panel, can be inserted between the ramps - storage fixture in front of the front wall when not in use
* Rear stakes bolted
---- Load Securing:
* Perforated outer frame approx. 45° angled with 2 t lashing capacity every 480 mm
* Option to install 3 t drop lashing rings every 600 mm
* 1 x 10 t lashing ring each at the front and rear corners, various bore holes for 1.2 t lashing available in front and rear crossmembers
---- Ramps:
* One-piece mechanical grating ramps with spring system for one-man operation, approx. 2,750 x 620 mm (can be narrowed to 20 mm apart)
* Rear ramp slope approx. 860 mm
---- Tires:
* Wheelbase: 1,310 mm
* Tires: 235/75R17.5
---- Paintwork:
* Chassis, drawbar, front wall, tailgate, rear support legs, and drive-on ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in black
* Side wall paintwork in RAL 9010 pure white
* Painting of side panels in any RAL color available at extra cost
---- Information:
* New vehicle with manufacturer's warranty
* Subject to prior sale and errors
---- Delivery time:
* Available immediately ex Egestorf
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
---- Brakes:
* Wabco EBS-E (electronic braking system)
* Emergency release device for spring brake cylinders
* Drum brakes
Njdpfx Amjpk D D Hefscu
---- Axles:
* 2 x 11 t Gigant axles
---- Suspension:
* Air suspension with manual lowering at the rear
---- Drawbar / Flange Drawbar Eye:
* Drawbar with 50 mm flanged tow eye and height-adjustable drawbar
---- Electrical / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin power connector
* LED tail lights
---- General Attachments:
* Jost landing gear at the front
* External folding support legs at the rear
* Tool box made of galvanized steel sheet approx. 650 x 350 x 320 mm, mounted right side (black powder-coated)
* Side underrun protection
* Plastic quarter mudguards
---- Low Loader Platform:
* Reinforcement package for drilling rig transport on chassis - loading height + 20 mm
* 50 mm softwood floor in clamped design
* Provision in front of the front wall for retrofitting container locks
* Bolted front wall made of smooth sheet steel
* Side walls made of trapezoidal-profiled steel, foldable with tailgate spring assist
* Rear steel panel, can be inserted between the ramps - storage fixture in front of the front wall when not in use
* Rear stakes bolted
---- Load Securing:
* Perforated outer frame approx. 45° angled with 2 t lashing capacity every 480 mm
* Option to install 3 t drop lashing rings every 600 mm
* 1 x 10 t lashing ring each at the front and rear corners, various bore holes for 1.2 t lashing available in front and rear crossmembers
---- Ramps:
* One-piece mechanical grating ramps with spring system for one-man operation, approx. 2,750 x 620 mm (can be narrowed to 20 mm apart)
* Rear ramp slope approx. 860 mm
---- Tires:
* Wheelbase: 1,310 mm
* Tires: 235/75R17.5
---- Paintwork:
* Chassis, drawbar, front wall, tailgate, rear support legs, and drive-on ramps hot-dip galvanized
* Axles, springs, air tanks, and landing gear painted in black
* Side wall paintwork in RAL 9010 pure white
* Painting of side panels in any RAL color available at extra cost
---- Information:
* New vehicle with manufacturer's warranty
* Subject to prior sale and errors
---- Delivery time:
* Available immediately ex Egestorf
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
169 Sludinājumi tiešsaistē
Nosūtīt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Egestorf
1 012 km
Zema kravnes piekabe
MÜLLER-MITTELTAL19 to luftgef. Tandemtieflader mit Auffahrrampen
MÜLLER-MITTELTAL19 to luftgef. Tandemtieflader mit Auffahrrampen
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda














































