Zema kravnes piekabeMÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit Auffahrrampen
Zema kravnes piekabe
MÜLLER-MITTELTAL
19 to luftgef. Tandemtieflader mit Auffahrrampen
fiksēta cena bez PVN
32 950 €
(39 210 € bruto)
Izgatavošanas gads
2024
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Rādīt attēlus
Rādīt karti
Pamatdati
Cena un atrašanās vieta
fiksēta cena bez PVN
32 950 €
(39 210 € bruto)
- Pārdevēja atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Vācija

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 14 550 kg
- Kopējais svars:
- 19 000 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 6 270 mm
- Iekraušanas vietas platums:
- 2 470 mm
- Iekraušanas telpas augstums:
- 400 mm
Piedāvājuma informācija
- Ieraksta ID:
- A128-69-474
- Atsauces Nr.:
- 5954
- Pēdējoreiz atjaunots:
- 16.12.2461026
Apraksts
* ETÜ-TA-R 19.0:
* Wabco EBS-E (electronic braking system)
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11-tonne Gigant axles
* Air suspension
* Drawbar with 50 mm flanged towing eye and height-adjustable drawbar
* Jost support winch at the front
* External foldable support legs at the rear
* Toolbox made of galvanized steel sheet approx. 650 x 350 x 320 mm, mounted on the right side (black powder-coated)
* Side underride protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED tail lights
* Reinforcement package for drill rig transport on chassis - loading height + 20 mm
* 50 mm softwood flooring in clamped design
* Fixture in front of headboard for retrofitting container locks
* Bolted headboard made from smooth sheet metal
* Drop-down side panels made from trapezoidal-profile steel with board side spring assist
* Rear steel panel can be slid between the ramps - storage bracket inside in front of the headboard when not in use
* Rear stanchions bolted
* Perforated outer frame approx. 45 degrees bent with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing rings every 600 mm
* In the front and rear corners 1 x 10 t lashing point each; various holes for 1.2 t lashing points in the front and rear carrier
* One-piece mechanical grating loading ramps with spring system for single-person operation approx. 2,750 x 620 mm (can be collapsed down to 20 mm)
* Rear approach angle approx. 860 mm
* Chassis, drawbar, headboard, tailgate, rear foldable supports, and ramps hot-dip galvanized
* Axles, springs, air tank, and support winch painted black
Ijdepk D Ncjpfx Aggotr
* Wheelbase: 1,310 mm
* Tires: 235/75R17.5
* Side panel painting in RAL 9010 pure white
* Side wall painting in any RAL color available at extra charge
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
* Immediately available ex Egestorf
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
* Wabco EBS-E (electronic braking system)
* TPMS (Tire Pressure Monitoring System)
* Emergency release device for spring brake cylinders
* Drum brakes
* 2 x 11-tonne Gigant axles
* Air suspension
* Drawbar with 50 mm flanged towing eye and height-adjustable drawbar
* Jost support winch at the front
* External foldable support legs at the rear
* Toolbox made of galvanized steel sheet approx. 650 x 350 x 320 mm, mounted on the right side (black powder-coated)
* Side underride protection
* Plastic quarter mudguards
* 15-pin electrical connector
* LED tail lights
* Reinforcement package for drill rig transport on chassis - loading height + 20 mm
* 50 mm softwood flooring in clamped design
* Fixture in front of headboard for retrofitting container locks
* Bolted headboard made from smooth sheet metal
* Drop-down side panels made from trapezoidal-profile steel with board side spring assist
* Rear steel panel can be slid between the ramps - storage bracket inside in front of the headboard when not in use
* Rear stanchions bolted
* Perforated outer frame approx. 45 degrees bent with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing rings every 600 mm
* In the front and rear corners 1 x 10 t lashing point each; various holes for 1.2 t lashing points in the front and rear carrier
* One-piece mechanical grating loading ramps with spring system for single-person operation approx. 2,750 x 620 mm (can be collapsed down to 20 mm)
* Rear approach angle approx. 860 mm
* Chassis, drawbar, headboard, tailgate, rear foldable supports, and ramps hot-dip galvanized
* Axles, springs, air tank, and support winch painted black
Ijdepk D Ncjpfx Aggotr
* Wheelbase: 1,310 mm
* Tires: 235/75R17.5
* Side panel painting in RAL 9010 pure white
* Side wall painting in any RAL color available at extra charge
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
* Immediately available ex Egestorf
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Egestorf
1 011 km
Piekabe ar darba platformu
MÜLLER-MITTELTAL19 to luftgef. Tandemtieflader mit Auffahrrampen
MÜLLER-MITTELTAL19 to luftgef. Tandemtieflader mit Auffahrrampen
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda














































