Trīspusējā pašizgāzēja piekabeMÜLLER-MITTELTAL
14,4 to Tand- Tiefl mit 2- Seitenkipper
Trīspusējā pašizgāzēja piekabe
MÜLLER-MITTELTAL
14,4 to Tand- Tiefl mit 2- Seitenkipper
fiksēta cena bez PVN
34 950 €
(41 590 € bruto)
Izgatavošanas gads
2026
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Rādīt attēlus
Rādīt karti
Pamatdati
- Apzīmējums:
- Trīspusējā pašizgāzēja piekabe
- Ražotājs:
- MÜLLER-MITTELTAL
- Izgatavošanas gads:
- 2026
- Stāvoklis:
- jauns
Cena un atrašanās vieta
fiksēta cena bez PVN
34 950 €
(41 590 € bruto)
- Pārdevēja atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Vācija

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 10 400 kg
- Kopējais svars:
- 14 400 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 5 500 mm
- Iekraušanas vietas platums:
- 2 420 mm
- Iekraušanas telpas augstums:
- 500 mm
Piedāvājuma informācija
- Ieraksta ID:
- A162-17-599
- Atsauces Nr.:
- 6265
- Pēdējoreiz atjaunots:
- 14.1.2461055
Apraksts
* ETK-TA-R 14.4:
----Brakes:
* EBS (Electronic Braking System)
* Emergency release device for spring-actuated cylinders
* Drum brakes
----Axle:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer assembly
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar (range 300 mm) with 40 mm flange drawbar eye
----Electrics / Lighting:
* Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required
* 15-pin power connector
* LED tail lights
----General Attachments:
* Mechanical landing gear at the front
* Two mechanical folding supports at the rear
* Plastic toolbox approximately 750 x 350 x 300 mm, mounted on the right side
* Bolted underrun protection
* Plastic quarter mudguards
----Frame:
* Main frame made of high-tensile fine-grained steel
----Tipping Platform:
* Mesh hooks on the sides and rear at the central locking mounts, plus 2 hooks on the front wall
* 2-way steel pallet tipper body with fixed smooth sheet metal front wall, continuous drop sides – foldable without center posts with board lifting springs, and swinging via manual central locking
* Rear posts bolted
* Steel rear wall inserted in front of the ramps
Bjdstr St Uopfx Afhscu
* Each corner with 1 x 5 t lashing point, and 4 x 3 t lashing rings embedded in the outer frame on each side
* 4 mm floor made of high-tensile fine-grained steel
----Ramps:
* Two-part mechanical mesh drive-up ramps with aluminum tip section, 2,150 + 1,300 mm x 600 mm (can be manually slid together to 80 mm)
----Paintwork:
* Chassis, drawbar, rear posts, underrun protection, mechanical supports, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange drawbar eye, and landing gear painted in black
* Sideboards and platform in RAL 9010 pure white
* Paintwork of sidewalls and tipping platform in any RAL color available at extra cost
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from week 07/2026
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
----Brakes:
* EBS (Electronic Braking System)
* Emergency release device for spring-actuated cylinders
* Drum brakes
----Axle:
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with tandem equalizer assembly
----Drawbar / Flange Drawbar Eye:
* Height-adjustable drawbar (range 300 mm) with 40 mm flange drawbar eye
----Electrics / Lighting:
* Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required
* 15-pin power connector
* LED tail lights
----General Attachments:
* Mechanical landing gear at the front
* Two mechanical folding supports at the rear
* Plastic toolbox approximately 750 x 350 x 300 mm, mounted on the right side
* Bolted underrun protection
* Plastic quarter mudguards
----Frame:
* Main frame made of high-tensile fine-grained steel
----Tipping Platform:
* Mesh hooks on the sides and rear at the central locking mounts, plus 2 hooks on the front wall
* 2-way steel pallet tipper body with fixed smooth sheet metal front wall, continuous drop sides – foldable without center posts with board lifting springs, and swinging via manual central locking
* Rear posts bolted
* Steel rear wall inserted in front of the ramps
Bjdstr St Uopfx Afhscu
* Each corner with 1 x 5 t lashing point, and 4 x 3 t lashing rings embedded in the outer frame on each side
* 4 mm floor made of high-tensile fine-grained steel
----Ramps:
* Two-part mechanical mesh drive-up ramps with aluminum tip section, 2,150 + 1,300 mm x 600 mm (can be manually slid together to 80 mm)
----Paintwork:
* Chassis, drawbar, rear posts, underrun protection, mechanical supports, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange drawbar eye, and landing gear painted in black
* Sideboards and platform in RAL 9010 pure white
* Paintwork of sidewalls and tipping platform in any RAL color available at extra cost
----Information:
* New vehicle with manufacturer's warranty
* Subject to errors and prior sale
----Delivery time:
* Available from week 07/2026
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Egestorf
1 012 km
Zema kravnes piekabe
MÜLLER-MITTELTAL14,4 to Tand- Tiefl mit 2- Seitenkipper
MÜLLER-MITTELTAL14,4 to Tand- Tiefl mit 2- Seitenkipper
Mazā sludinājuma
Gevelsberg
1 277 km
Trīspusējā pašizgāzēja piekabe
HUMBAURDreiseitenkipper HTK 10 50 24, GG:10,5 to.
HUMBAURDreiseitenkipper HTK 10 50 24, GG:10,5 to.
Mazā sludinājuma
Gevelsberg
1 277 km
Trīspusējā pašizgāzēja piekabe
HUMBAURHTK 754020 Dreiseitenkipper GG:7,5to
HUMBAURHTK 754020 Dreiseitenkipper GG:7,5to
Mazā sludinājuma
Triptis
1 076 km
Zems iekrāvējs
FlieglTPS 118 Bau m Heckanschrägung
FlieglTPS 118 Bau m Heckanschrägung
Mazā sludinājuma
Neu-Ulm
1 360 km
Trīspusējā pašizgāzēja piekabe
Humbaur3-Seitenkipper HTK 3000.31 Alu, mit Laubgitteraufsatz, 3140 x 1750 x 350 mm, 3,0 to.
Humbaur3-Seitenkipper HTK 3000.31 Alu, mit Laubgitteraufsatz, 3140 x 1750 x 350 mm, 3,0 to.
Mazā sludinājuma
Wardenburg
1 128 km
Trīspusējā pašizgāzēja piekabe
MÜLLER-MITTELTALTandem-3-Seiten-Kipper KA-TA-R 11,9
MÜLLER-MITTELTALTandem-3-Seiten-Kipper KA-TA-R 11,9
Mazā sludinājuma
Gondelsheim
1 373 km
Trīspusējā pašizgāzēja piekabe
HUMBAURHTK 105024 - Neu - Dreiseitenkipper
HUMBAURHTK 105024 - Neu - Dreiseitenkipper
Mazā sludinājuma
Egestorf
1 012 km
Zema kravnes piekabe
MÜLLER-MITTELTAL2 achs Tandem Stahl 3 Seitenkip. mit Kombiklappe
MÜLLER-MITTELTAL2 achs Tandem Stahl 3 Seitenkip. mit Kombiklappe
Mazā sludinājuma
Alsdorf
1 375 km
Trīspusējā pašizgāzēja piekabe
MÜLLER-MITTELTALKA-TA-R 11,9, doppelte Bordwände/ Aufsatz
MÜLLER-MITTELTALKA-TA-R 11,9, doppelte Bordwände/ Aufsatz
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda
















































































































































