Zema kravnes piekabeMÜLLER-MITTELTAL
14,4 to Tand- Tiefl mit 2- Seitenkipper
Zema kravnes piekabe
MÜLLER-MITTELTAL
14,4 to Tand- Tiefl mit 2- Seitenkipper
fiksēta cena bez PVN
34 950 €
(41 590 € bruto)
Izgatavošanas gads
2026
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Rādīt attēlus
Rādīt karti
Pamatdati
Cena un atrašanās vieta
fiksēta cena bez PVN
34 950 €
(41 590 € bruto)
- Pārdevēja atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Vācija

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 10 400 kg
- Kopējais svars:
- 14 400 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 5 500 mm
- Iekraušanas vietas platums:
- 2 420 mm
- Iekraušanas telpas augstums:
- 500 mm
Piedāvājuma informācija
- Ieraksta ID:
- A162-17-602
- Atsauces Nr.:
- 62651
- Pēdējoreiz atjaunots:
- 11.10.2460960
Apraksts
* ETK-TA-R 14.4:
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 7 ton Gigant axles
* Parabolic springs with tandem equalizing unit
* Tire pressure monitoring with display option in the truck via EBS signal, no truck-side installation required
* Drawbar adjustable in height by 300 mm with 40 mm flange towing eye
* Mechanical landing gear at the front
* Rear: 2 mechanical folding supports
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side
* 15-pin electrical connector
Itsdpfxstr Sucs Aggsr
* Multi-chamber tail lights
* Bolted underrun protection
* Plastic quarter mudguards
* Net hooks on the side and rear in the central locking mounts, as well as 2 pieces on the front wall
* Main frame made of high-tensile steel
* Steel pallet - 2-way tipper superstructure: front wall fixed and made of smooth sheet, continuous side walls foldable without central stanchions, with drop-side lifting support and swinging via manual central locking
* Rear stanchions bolted
* Steel rear wall slid in front of the ramps
* At each corner: 1 x 5 ton lashing point, and 4 x 3 ton lashing rings recessed into the outer frame on each side
* 4 mm floor made of high-tensile steel
* Two-piece mechanical grid ramp with aluminum tip: 2,150 + 1,300 mm x 600 mm (manually retractable to 80 mm)
* Chassis, drawbar, rear stanchions, underrun protection, mechanical drop supports, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange eye, and landing gear painted black
* Side panels and platform in RAL 9010 pure white
* Painting of the side panels and tipping body in a RAL color of choice available at extra cost
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
* Available from CW 07/2026
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
* EBS (Electronic Braking System)
* Emergency release device for spring-loaded cylinders
* Drum brakes
* 2 x 7 ton Gigant axles
* Parabolic springs with tandem equalizing unit
* Tire pressure monitoring with display option in the truck via EBS signal, no truck-side installation required
* Drawbar adjustable in height by 300 mm with 40 mm flange towing eye
* Mechanical landing gear at the front
* Rear: 2 mechanical folding supports
* Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side
* 15-pin electrical connector
Itsdpfxstr Sucs Aggsr
* Multi-chamber tail lights
* Bolted underrun protection
* Plastic quarter mudguards
* Net hooks on the side and rear in the central locking mounts, as well as 2 pieces on the front wall
* Main frame made of high-tensile steel
* Steel pallet - 2-way tipper superstructure: front wall fixed and made of smooth sheet, continuous side walls foldable without central stanchions, with drop-side lifting support and swinging via manual central locking
* Rear stanchions bolted
* Steel rear wall slid in front of the ramps
* At each corner: 1 x 5 ton lashing point, and 4 x 3 ton lashing rings recessed into the outer frame on each side
* 4 mm floor made of high-tensile steel
* Two-piece mechanical grid ramp with aluminum tip: 2,150 + 1,300 mm x 600 mm (manually retractable to 80 mm)
* Chassis, drawbar, rear stanchions, underrun protection, mechanical drop supports, and ramps hot-dip galvanized
* Axles, springs, air tanks, flange eye, and landing gear painted black
* Side panels and platform in RAL 9010 pure white
* Painting of the side panels and tipping body in a RAL color of choice available at extra cost
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
* Available from CW 07/2026
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Egestorf
1 011 km
Piekabe ar darba platformu
MÜLLER-MITTELTAL14,4 to Tand- Tiefl mit 2- Seitenkipper
MÜLLER-MITTELTAL14,4 to Tand- Tiefl mit 2- Seitenkipper
Mazā sludinājuma
Egestorf
1 012 km
Trīspusējā pašizgāzēja piekabe
MÜLLER-MITTELTAL14,4 to Tand- Tiefl mit 2- Seitenkipper
MÜLLER-MITTELTAL14,4 to Tand- Tiefl mit 2- Seitenkipper
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda










































































