PiekabeMÜLLER-MITTELTAL
KWH 9,9 Kabeltransport-Anhänger
Piekabe
MÜLLER-MITTELTAL
KWH 9,9 Kabeltransport-Anhänger
Fiksēta cena plus PVN
34 000 €
(40 460 € bruto)
Ražošanas gads
2026
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Pamatdati
- Apzīmējums:
- Piekabe
- Ražotājs:
- MÜLLER-MITTELTAL
- Modelis:
- KWH 9,9 Kabeltransport-Anhänger
- Ražošanas gads:
- 2026
- Stāvoklis:
- jauns
Cena un atrašanās vieta
Fiksēta cena plus PVN
34 000 €
(40 460 € bruto)
- Pārdevēja atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Vācija

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 6 900 kg
- Kopējais svars:
- 9 900 kg
- Asu konfigurācija:
- 1 ass
Piedāvājuma informācija
- Sludinājuma ID:
- A205-89-810
- Atsauces numurs:
- 6331
- Atjaunināšana:
- pēdējo reizi 11.06.2026
Apraksts
* KWH 9.9 ML:
----Brakes:
* EBS braking system
* Drum brake
----Axle:
* BPW axle
----Suspension:
* Parabolic springs
----Electrical System / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin electrical connector
* LED lighting
* Flashing LED side marker lights
----Drawbar / Flange Coupling:
* Drawbar with 40 mm screw coupling (height adjustable in mm)
----General Components:
* Front support jack
* Spring-supported square tube supports at the rear with base plate, safety locking pins for different support heights
* Closed steel sheet mudguards with splash protection
* Closed side impact protection, usable as an advertising area
* Plastic toolbox with floor insert (horizontal installation), approx. 500 x 350 x 400 mm
----Superstructure:
* Swiveling cable drum superstructure, width between the drum arms 1,700 mm, with tensioning closure for securing the drum at the ends of the support arms, as well as a locking mechanism for the cable drum superstructure with the chassis via a centrally arranged claw lock
* Motor-hydraulic drum drive with oil motor
* Valves and adjustable rubber-coated drive rollers
Fpsdpfjxyniwjx Amrei
* Hydraulic speed controller and brake for drum drive
* Steel drum shaft with 76 mm diameter, with centering and rotatable ends
* 1 pair of centering cones made of polyamide, stepped arrangement
* Preparation of steel structure and hydraulics for retrofitting a separate motor
----Chassis:
* Chassis made of torsion-resistant square tubes and cross members
----Hydraulics:
* Hydraulic line for supply and return
----Tires:
* 315/80 R 22.5 tires
----Painting:
* Vehicle is hot-dip galvanized
----Information:
* 2,690 kg unladen weight
* New vehicle with full manufacturer warranty
* Errors and prior sale excepted
----Delivery time:
* Available for immediate delivery from Egestorf
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
----Brakes:
* EBS braking system
* Drum brake
----Axle:
* BPW axle
----Suspension:
* Parabolic springs
----Electrical System / Lighting:
* TPMS (Tire Pressure Monitoring System)
* 15-pin electrical connector
* LED lighting
* Flashing LED side marker lights
----Drawbar / Flange Coupling:
* Drawbar with 40 mm screw coupling (height adjustable in mm)
----General Components:
* Front support jack
* Spring-supported square tube supports at the rear with base plate, safety locking pins for different support heights
* Closed steel sheet mudguards with splash protection
* Closed side impact protection, usable as an advertising area
* Plastic toolbox with floor insert (horizontal installation), approx. 500 x 350 x 400 mm
----Superstructure:
* Swiveling cable drum superstructure, width between the drum arms 1,700 mm, with tensioning closure for securing the drum at the ends of the support arms, as well as a locking mechanism for the cable drum superstructure with the chassis via a centrally arranged claw lock
* Motor-hydraulic drum drive with oil motor
* Valves and adjustable rubber-coated drive rollers
Fpsdpfjxyniwjx Amrei
* Hydraulic speed controller and brake for drum drive
* Steel drum shaft with 76 mm diameter, with centering and rotatable ends
* 1 pair of centering cones made of polyamide, stepped arrangement
* Preparation of steel structure and hydraulics for retrofitting a separate motor
----Chassis:
* Chassis made of torsion-resistant square tubes and cross members
----Hydraulics:
* Hydraulic line for supply and return
----Tires:
* 315/80 R 22.5 tires
----Painting:
* Vehicle is hot-dip galvanized
----Information:
* 2,690 kg unladen weight
* New vehicle with full manufacturer warranty
* Errors and prior sale excepted
----Delivery time:
* Available for immediate delivery from Egestorf
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
171 Sludinājumi tiešsaistē
Nosūtīt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Egestorf
1 012 km
Piekabe
MÜLLER-MITTELTALKWH 9,9 Kabeltransport-Anhänger mit Dieselmotor
MÜLLER-MITTELTALKWH 9,9 Kabeltransport-Anhänger mit Dieselmotor
Mazā sludinājuma
Egestorf
1 012 km
Piekabe
MÜLLER-MITTELTALKWH 9,9 Kabeltransport-Anhänger mit Dieselmotor
MÜLLER-MITTELTALKWH 9,9 Kabeltransport-Anhänger mit Dieselmotor
Mazā sludinājuma
Egestorf
1 012 km
Trīspusējā pašizgāzēja piekabe
MÜLLER-MITTELTALKWH 9,9 Kabeltransport-Anhänger mit Benzinmotor
MÜLLER-MITTELTALKWH 9,9 Kabeltransport-Anhänger mit Benzinmotor
Mazā sludinājuma
Egestorf
1 012 km
Šasijas piekabe
MÜLLER-MITTELTALKWH 9,9 Kabeltransport-Anhänger mit Dieselmotor
MÜLLER-MITTELTALKWH 9,9 Kabeltransport-Anhänger mit Dieselmotor
Mazā sludinājuma
Egestorf
1 012 km
Piekabe
MÜLLER-MITTELTALKWH 9,9 Kabeltransport-Anhänger mit Benzinmotor
MÜLLER-MITTELTALKWH 9,9 Kabeltransport-Anhänger mit Benzinmotor
Mazā sludinājuma
Bobenheim - Roxheim
1 348 km
Piekabe
MÜLLER-MITTELTALKWH 9,9 ML Kabeltransport Anhänger m. Diesel Mot
MÜLLER-MITTELTALKWH 9,9 ML Kabeltransport Anhänger m. Diesel Mot
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda



































































































































































