Zema kravnes piekabeMÜLLER-MITTELTAL
18 t.Außenroller Container Anhänger, 2 in 1
Zema kravnes piekabe
MÜLLER-MITTELTAL
18 t.Außenroller Container Anhänger, 2 in 1
fiksēta cena bez PVN
39 950 €
(47 540 € bruto)
Izgatavošanas gads
2026
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Rādīt attēlus
Rādīt karti
Pamatdati
Cena un atrašanās vieta
fiksēta cena bez PVN
39 950 €
(47 540 € bruto)
- Pārdevēja atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Vācija

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 13 700 kg
- Kopējais svars:
- 18 000 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 7 000 mm
- Iekraušanas vietas platums:
- 2 480 mm
Piedāvājuma informācija
- Ieraksta ID:
- A104-34-410
- Atsauces Nr.:
- 60291
- Pēdējoreiz atjaunots:
- 24.10.2460973
Apraksts
* TRA 18.0:
* 2 in 1 = suitable for roll-off containers and as a low-loader
* RDÜ (Tire Pressure Monitoring System)
* EBS electronic braking system
* Emergency release for spring brake cylinders
* Drum brakes
* 2 x 10 ton axles
* Air suspension with manual lowering at the rear
* Drawbar 2,000 mm long with 40 mm towing eye and adjustable height mechanism
* Tool box made of powder-coated steel sheet approx. 1,000 x 300 x 600 mm, as well as a spare wheel holder in basket design on the right side
* Reflective contour tape on sides and rear
* Side underrun protection
* Plastic quarter mudguards with spray protection
* Rear plastic buffer guards
* Foldable "A" sign at rear
Csdpfsl Tq Nmsx Abzjhd
* LED tail lights
* 15-pin electrical connector
* Main frame with raised outer rails for guiding roll containers
* Steel floor with roller recesses in the turntable area
* Container length possible from 5,500 to 7,000 mm
* Pneumatic 4-point locking clamp, plus mechanical plug-in stop angles at the front in the running track, load securing certificate according to DIN 30722-1
* Lashing package consisting of: 1 pair of 10 t UVV lashing rings at the front on the front wall beam, 3 pairs of 10 t UVV lashing rings on the side in the outer frame, 4 x 2 t clover-shaped lashing eyes per side, and 4 x 8 t recessed lashing shackles in the outer frame
* Weld bead as anti-slip coating in the ramp area of the running path
* Mechanical drop-down support legs at the rear
* 1 pair of aluminum approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear)
* Chassis, turntable, locking parts, and rear drop-down supports are hot-dip galvanized
* Drawbar, axles, and air reservoir painted in a shade of black
* New vehicle without initial registration, full manufacturer's warranty
* Errors and prior sale excepted
* Available from CW 05/2026
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
* 2 in 1 = suitable for roll-off containers and as a low-loader
* RDÜ (Tire Pressure Monitoring System)
* EBS electronic braking system
* Emergency release for spring brake cylinders
* Drum brakes
* 2 x 10 ton axles
* Air suspension with manual lowering at the rear
* Drawbar 2,000 mm long with 40 mm towing eye and adjustable height mechanism
* Tool box made of powder-coated steel sheet approx. 1,000 x 300 x 600 mm, as well as a spare wheel holder in basket design on the right side
* Reflective contour tape on sides and rear
* Side underrun protection
* Plastic quarter mudguards with spray protection
* Rear plastic buffer guards
* Foldable "A" sign at rear
Csdpfsl Tq Nmsx Abzjhd
* LED tail lights
* 15-pin electrical connector
* Main frame with raised outer rails for guiding roll containers
* Steel floor with roller recesses in the turntable area
* Container length possible from 5,500 to 7,000 mm
* Pneumatic 4-point locking clamp, plus mechanical plug-in stop angles at the front in the running track, load securing certificate according to DIN 30722-1
* Lashing package consisting of: 1 pair of 10 t UVV lashing rings at the front on the front wall beam, 3 pairs of 10 t UVV lashing rings on the side in the outer frame, 4 x 2 t clover-shaped lashing eyes per side, and 4 x 8 t recessed lashing shackles in the outer frame
* Weld bead as anti-slip coating in the ramp area of the running path
* Mechanical drop-down support legs at the rear
* 1 pair of aluminum approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear)
* Chassis, turntable, locking parts, and rear drop-down supports are hot-dip galvanized
* Drawbar, axles, and air reservoir painted in a shade of black
* New vehicle without initial registration, full manufacturer's warranty
* Errors and prior sale excepted
* Available from CW 05/2026
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
mazā sludinājuma
Egestorf
1 012 km
Rullplatformas piekabe
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda



































































