Zema kravnes piekabeMÜLLER-MITTELTAL
14,4 to. Tandem Tieflader mit Auffahrrampen
Zema kravnes piekabe
MÜLLER-MITTELTAL
14,4 to. Tandem Tieflader mit Auffahrrampen
fiksēta cena bez PVN
27 950 €
(33 260 € bruto)
Izgatavošanas gads
2026
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Rādīt attēlus
Rādīt karti
Pamatdati
Cena un atrašanās vieta
fiksēta cena bez PVN
27 950 €
(33 260 € bruto)
- Pārdevēja atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Vācija

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 10 760 kg
- Kopējais svars:
- 14 400 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 6 270 mm
- Iekraušanas vietas platums:
- 2 470 mm
- Iekraušanas telpas augstums:
- 400 mm
Piedāvājuma informācija
- Ieraksta ID:
- A144-06-193
- Atsauces Nr.:
- 59111 a
- Pēdējoreiz atjaunots:
- 05.2.2461077
Apraksts
* ETÜ-TA-R 14.4:
----Brakes:
* Drum brakes
* Electronic Braking System (EBS)
* Emergency release device for spring brake cylinders
----Axles:
Cpsdpfx Aasq Dyvvoxeu
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange Eye:
* Height-adjustable drawbar (300 mm adjustment range)
* Drawbar extension by 250 mm to a total length of 2,250 mm
* 40 mm flange towing eye
----Lighting / Electrics:
* TPMS (Tyre Pressure Monitoring System)
* LED lighting
----General Accessories:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox mounted front right, outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted smooth sheet steel bulkhead
* Foldable side walls made of trapezoidal steel plate with drop-side lift assist
* Steel rear wall, insertable between the ramps - storage bracket located inside, in front of the bulkhead when not in use
* Bolted rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Optional installation of 3 t drop lashing points every 600 mm
* 1 x 6.3 t lashing rings in each front and rear corner
* Various holes in front and rear end crossmembers for 1.2 t lashing options
----Ramps:
* Single-piece mechanical grid ramps with spring mechanism for one-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm)
* Rear drive-on angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, bulkhead, access ramps, and rear wall
* Side wall color in RAL 9010 pure white
* Painting of side walls in other RAL colors available at extra cost
----Information:
* --Reinforced and certified body according to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
----Delivery time:
* Available from CW 08/2026
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
----Brakes:
* Drum brakes
* Electronic Braking System (EBS)
* Emergency release device for spring brake cylinders
----Axles:
Cpsdpfx Aasq Dyvvoxeu
* 2 x 7 t Gigant axles
----Suspension:
* Parabolic springs with compensation unit
----Drawbar / Flange Eye:
* Height-adjustable drawbar (300 mm adjustment range)
* Drawbar extension by 250 mm to a total length of 2,250 mm
* 40 mm flange towing eye
----Lighting / Electrics:
* TPMS (Tyre Pressure Monitoring System)
* LED lighting
----General Accessories:
* Jost landing gear at the front
* Externally mounted, hot-dip galvanized folding supports at the rear
* Plastic toolbox mounted front right, outside on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
----Low Loader Platform:
* 50 mm softwood flooring
* Preparation in front of the bulkhead for retrofitting container locks
* Bolted smooth sheet steel bulkhead
* Foldable side walls made of trapezoidal steel plate with drop-side lift assist
* Steel rear wall, insertable between the ramps - storage bracket located inside, in front of the bulkhead when not in use
* Bolted rear stanchions
----Load Securing:
* Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm
* Optional installation of 3 t drop lashing points every 600 mm
* 1 x 6.3 t lashing rings in each front and rear corner
* Various holes in front and rear end crossmembers for 1.2 t lashing options
----Ramps:
* Single-piece mechanical grid ramps with spring mechanism for one-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm)
* Rear drive-on angle approx. 860 mm
----Paintwork:
* Hot-dip galvanized chassis as well as drawbar, bulkhead, access ramps, and rear wall
* Side wall color in RAL 9010 pure white
* Painting of side walls in other RAL colors available at extra cost
----Information:
* --Reinforced and certified body according to EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer warranty
* Subject to errors and prior sale
----Delivery time:
* Available from CW 08/2026
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Egestorf
1 012 km
Zema kravnes piekabe
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Mazā sludinājuma
Carditello
1 924 km
Paneļu furgons
FORDTRANSIT CUSTOM MAXI DIESEL HYBRID 2021
FORDTRANSIT CUSTOM MAXI DIESEL HYBRID 2021
Mazā sludinājuma
Egestorf
1 012 km
Zema kravnes piekabe
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Mazā sludinājuma
Egestorf
1 012 km
Zema kravnes piekabe
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Mazā sludinājuma
Egestorf
1 012 km
Zema kravnes piekabe
MÜLLER-MITTELTAL11,9 to Tandemtieflader mit Auffahrrampen
MÜLLER-MITTELTAL11,9 to Tandemtieflader mit Auffahrrampen
Mazā sludinājuma
Egestorf
1 011 km
Piekabe ar darba platformu
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Mazā sludinājuma
Egestorf
1 012 km
Zema kravnes piekabe
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda

























































































































































