Zema kravnes piekabeMÜLLER-MITTELTAL
14,4 to. Tandem Tieflader mit Auffahrrampen
Zema kravnes piekabe
MÜLLER-MITTELTAL
14,4 to. Tandem Tieflader mit Auffahrrampen
fiksēta cena bez PVN
27 950 €
(33 260 € bruto)
Izgatavošanas gads
2026
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Rādīt attēlus
Rādīt karti
Pamatdati
Cena un atrašanās vieta
fiksēta cena bez PVN
27 950 €
(33 260 € bruto)
- Pārdevēja atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Vācija

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 10 900 kg
- Kopējais svars:
- 14 400 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 6 270 mm
- Iekraušanas vietas platums:
- 2 470 mm
- Iekraušanas telpas augstums:
- 400 mm
Piedāvājuma informācija
- Ieraksta ID:
- A152-54-665
- Atsauces Nr.:
- 5911 a
- Pēdējoreiz atjaunots:
- 13.12.2461023
Apraksts
* ETÜ-TA-R 14.4:
* RDÜ (Tire Pressure Monitoring System)
* Electronic Braking System (EBS)
* Emergency Release Device for Spring Brake Cylinders
* LED Lighting
* Drum Brakes
* 2 x 7-ton Gigant Axles
* Parabolic Springs with Equalizer
* Height-adjustable Drawbar by 300 mm
* Drawbar Extension by 250 mm to 2,250 mm
* Jost Landing Gear at the Front
* Externally Mounted, Hot-dip Galvanized Folding Support Legs at the Rear
* Plastic Toolbox, Front Right, on Bulkhead
* Side Underrun Protection
* Plastic Quarter Mudguards
* Hot-dip Galvanized Chassis and Drawbar
* Front Bulkhead
* Rear Wall
* Tailgate and Loading Ramps
* 50 mm Softwood Floor
* Preparation in Front of Bulkhead for Subsequent Installation of Container Locks
* Bolted Bulkhead from Smooth Sheet Metal
* Trapezoidal-profile Fold-down Steel Sidewalls with Sideboard Spring Assist
* Slide-in Steel Rear Wall between the Ramps—mounting bracket for storage inside the front bulkhead when not in use
* Bolted Rear Stanchions
* Perforated Outer Frame, approx. 45-degree angled, with 2 t lashing capacity every 480 mm; possible installation of 3 t recessed lashing rings every 600 mm; 1 x 6.3 t lashing point in each front and rear corner; various drillings for 1.2 t lashing options on the front and end cross members
Itsdervvflepfx Aggor
* One-piece Mechanical Grid Loading Ramps with Spring Mechanism for Single-person Operation, approx. 2,750 x 600 mm (collapsible to 20 mm)
* Rear Entry Slope approx. 860 mm
* --Reinforced and Certified Structure according to EN 12642 XL including Load Securing Certificate--
* Sideboard Color in RAL 9010 Pure White
* Sidewall Painting in Any RAL Color Available at Extra Cost
* New Vehicle with Manufacturer’s Warranty
* Subject to Errors and Prior Sale
* Available from Calendar Week 08/2026
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
* RDÜ (Tire Pressure Monitoring System)
* Electronic Braking System (EBS)
* Emergency Release Device for Spring Brake Cylinders
* LED Lighting
* Drum Brakes
* 2 x 7-ton Gigant Axles
* Parabolic Springs with Equalizer
* Height-adjustable Drawbar by 300 mm
* Drawbar Extension by 250 mm to 2,250 mm
* Jost Landing Gear at the Front
* Externally Mounted, Hot-dip Galvanized Folding Support Legs at the Rear
* Plastic Toolbox, Front Right, on Bulkhead
* Side Underrun Protection
* Plastic Quarter Mudguards
* Hot-dip Galvanized Chassis and Drawbar
* Front Bulkhead
* Rear Wall
* Tailgate and Loading Ramps
* 50 mm Softwood Floor
* Preparation in Front of Bulkhead for Subsequent Installation of Container Locks
* Bolted Bulkhead from Smooth Sheet Metal
* Trapezoidal-profile Fold-down Steel Sidewalls with Sideboard Spring Assist
* Slide-in Steel Rear Wall between the Ramps—mounting bracket for storage inside the front bulkhead when not in use
* Bolted Rear Stanchions
* Perforated Outer Frame, approx. 45-degree angled, with 2 t lashing capacity every 480 mm; possible installation of 3 t recessed lashing rings every 600 mm; 1 x 6.3 t lashing point in each front and rear corner; various drillings for 1.2 t lashing options on the front and end cross members
Itsdervvflepfx Aggor
* One-piece Mechanical Grid Loading Ramps with Spring Mechanism for Single-person Operation, approx. 2,750 x 600 mm (collapsible to 20 mm)
* Rear Entry Slope approx. 860 mm
* --Reinforced and Certified Structure according to EN 12642 XL including Load Securing Certificate--
* Sideboard Color in RAL 9010 Pure White
* Sidewall Painting in Any RAL Color Available at Extra Cost
* New Vehicle with Manufacturer’s Warranty
* Subject to Errors and Prior Sale
* Available from Calendar Week 08/2026
Sludinājums tika tulkots automātiski, tāpēc tajā varētu būt dažas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
Iesniegt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Egestorf
1 012 km
Zema kravnes piekabe
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Mazā sludinājuma
Egestorf
1 012 km
Zema kravnes piekabe
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Mazā sludinājuma
Egestorf
1 012 km
Zema kravnes piekabe
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Mazā sludinājuma
Egestorf
1 011 km
Piekabe ar darba platformu
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Mazā sludinājuma
Egestorf
1 012 km
Zema kravnes piekabe
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda
























































































































