Zema kravnes piekabeMÜLLER-MITTELTAL
14,4 to. Tandem Tieflader mit Auffahrrampen
Zema kravnes piekabe
MÜLLER-MITTELTAL
14,4 to. Tandem Tieflader mit Auffahrrampen
Fiksēta cena plus PVN
27 950 €
(33 260 € bruto)
Ražošanas gads
2026
Stāvoklis
Jauns
Atrašanās vieta
Egestorf 

Pamatdati
Cena un atrašanās vieta
Fiksēta cena plus PVN
27 950 €
(33 260 € bruto)
- Pārdevēja atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Vācija

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 10 760 kg
- Kopējais svars:
- 14 400 kg
- Asu konfigurācija:
- 2 asis
- Krautuves garums:
- 6 270 mm
- Iekraušanas vietas platums:
- 2 470 mm
- Iekraušanas telpas augstums:
- 400 mm
Piedāvājuma informācija
- Sludinājuma ID:
- A200-96-220
- Atsauces numurs:
- 59111 b
- Atjaunināšana:
- pēdējo reizi 14.05.2026
Apraksts
* ETÜ-TA-R 14.4:
---- Brakes:
* Drum brakes
* Electronic Brake System (EBS)
* Emergency release device for spring-loaded cylinders
---- Axles:
* 2 x 7 ton Gigant axles
---- Suspension:
* Parabolic springs with compensation unit
---- Drawbar / Flange ring eye:
* Drawbar height-adjustable by 300 mm
* Drawbar extension by 250 mm (up to 2,250 mm total length)
* 40 mm flange towing eye
---- Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
---- General attachments:
* Jost landing leg at the front
* Externally mounted, hot-dip galvanized foldable rear supports
* Plastic toolbox, front right exterior on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
---- Low loader platform:
* 50 mm softwood floor
* Pre-fitted fixture for retrofitting container locks in front of the bulkhead
* Bolted flat steel bulkhead
* Trapezoidal-profile steel drop sides, foldable with sideboard spring assist
* Steel rear wall, retractable between the ramps – storage bracket for disuse located inside at the bulkhead
* Bolted rear stanchions
---- Load securing:
Nedpjxglh Rofx Acmsct
* Perforated outer frame, approx. 45 degrees edged, with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing brackets every 600 mm
* In the corners front and rear: 1 x 6.3 t lashing ring each
* Various holes in the front bulkhead and end crossmember for 1.2 t lashing options
---- Ramps:
* One-piece mechanical grating access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Rear approach slope approx. 860 mm
---- Paintwork:
* Hot-dip galvanized chassis including drawbar, bulkhead, ramps, and rear wall
* Sideboard color in RAL 9010 pure white
* Painting of side panels in a RAL color of your choice available at extra cost
---- Information:
* --Reinforced and certified body in accordance with EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
---- Delivery time:
* Available from approx. CW 27/2026
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
---- Brakes:
* Drum brakes
* Electronic Brake System (EBS)
* Emergency release device for spring-loaded cylinders
---- Axles:
* 2 x 7 ton Gigant axles
---- Suspension:
* Parabolic springs with compensation unit
---- Drawbar / Flange ring eye:
* Drawbar height-adjustable by 300 mm
* Drawbar extension by 250 mm (up to 2,250 mm total length)
* 40 mm flange towing eye
---- Lighting / Electrics:
* TPMS (Tire Pressure Monitoring System)
* LED lighting
---- General attachments:
* Jost landing leg at the front
* Externally mounted, hot-dip galvanized foldable rear supports
* Plastic toolbox, front right exterior on the bulkhead
* Side underrun protection
* Plastic quarter mudguards
---- Low loader platform:
* 50 mm softwood floor
* Pre-fitted fixture for retrofitting container locks in front of the bulkhead
* Bolted flat steel bulkhead
* Trapezoidal-profile steel drop sides, foldable with sideboard spring assist
* Steel rear wall, retractable between the ramps – storage bracket for disuse located inside at the bulkhead
* Bolted rear stanchions
---- Load securing:
Nedpjxglh Rofx Acmsct
* Perforated outer frame, approx. 45 degrees edged, with 2 t lashing capacity every 480 mm
* Option to install 3 t folding lashing brackets every 600 mm
* In the corners front and rear: 1 x 6.3 t lashing ring each
* Various holes in the front bulkhead and end crossmember for 1.2 t lashing options
---- Ramps:
* One-piece mechanical grating access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm)
* Rear approach slope approx. 860 mm
---- Paintwork:
* Hot-dip galvanized chassis including drawbar, bulkhead, ramps, and rear wall
* Sideboard color in RAL 9010 pure white
* Painting of side panels in a RAL color of your choice available at extra cost
---- Information:
* --Reinforced and certified body in accordance with EN 12642 XL incl. load securing certificate--
* New vehicle with manufacturer's warranty
* Errors and prior sale excepted
---- Delivery time:
* Available from approx. CW 27/2026
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
170 Sludinājumi tiešsaistē
Nosūtīt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Egestorf
1 012 km
Zema kravnes piekabe
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Mazā sludinājuma
Egestorf
1 012 km
Zema kravnes piekabe
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Mazā sludinājuma
Egestorf
1 012 km
Zema kravnes piekabe
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Mazā sludinājuma
Egestorf
1 011 km
Piekabe ar darba platformu
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to Tandem Tieflader 7 mtr mit Auffahrrampen
Mazā sludinājuma
Egestorf
1 012 km
Zema kravnes piekabe
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
MÜLLER-MITTELTAL14,4 to. Tandem Tieflader mit Auffahrrampen
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda






























































































































