Rullplatformas piekabeMÜLLER-MITTELTAL
18 t.Außenroller Container Anhänger, 2 in 1
Rullplatformas piekabe
MÜLLER-MITTELTAL
18 t.Außenroller Container Anhänger, 2 in 1
Fiksēta cena plus PVN
37 500 €
(44 625 € bruto)
Ražošanas gads
2026
Stāvoklis
Lietots
Atrašanās vieta
Egestorf 

Pamatdati
Cena un atrašanās vieta
Fiksēta cena plus PVN
37 500 €
(44 625 € bruto)
- Pārdevēja atrašanās vieta:
- Eichenstich 12, 21272 Egestorf, Vācija

Zvanīt
Tehniskā informācija
- Maksimālā kravnesība:
- 13 700 kg
- Kopējais svars:
- 18 000 kg
- Asu konfigurācija:
- 2 asis
- Pirmā reģistrācija:
- 03/2026
- Nākamā pārbaude (TÜV):
- 03/2027
- Krautuves garums:
- 7 000 mm
- Iekraušanas vietas platums:
- 2 480 mm
Piedāvājuma informācija
- Sludinājuma ID:
- A222-55-687
- Atsauces numurs:
- 6371a
- Atjaunināšana:
- pēdējo reizi 03.07.2026
Apraksts
* TRA 18.0:
* 2 in 1 = for roll-off containers and as a low-bed trailer
----Brakes:
* EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 10-ton axles
----Suspension:
* Air suspension with lifting and lowering system and RTR valve
Blsdpfx Aozihcijc Toi
----Drawbar:
* Bent drawbar, 2,000 mm long, with pivoting drawbar eye 40 / 50 mm (without 8° eye)
* GHD height adjustment device instead of drawbar spring
----Electrical system / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal - without truck-side installation
* LED tail lights 12 / 24 V
* 15-pole power connector
----General components:
* Toolbox made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm
* Spare wheel holder on the right side
* Reflective contour marking tape on the sides and rear
* Side impact protection
* Plastic quarter fenders with splash guard
* Plastic rear impact protection buffer
* Foldable A-frame sign at the rear
----Loading platform:
* Main frame with raised outer frame for guiding roll-off containers
* Sheet steel floor with recesses for roll-off containers in the bogie area
* Continuous length of 5,500 - 7,000 mm possible
* Pneumatic 4-point locking system and mechanical plug-in stop angles at the front in the track, load securing certificate according to DIN 30722 - 1
* Welding bead as an anti-slip coating in the track area of the ramp
* Mechanical support legs at the rear
----Load securing:
* 1 pair of 10-ton UVV lashing rings at the front on the front wall support
* 3 pairs of 10-ton UVV lashing rings on the sides in the outer frame
* 4 x 2-ton lashing eyes in cloverleaf design on each side
* 4 x 8-ton lashing brackets recessed in the outer frame
----Ramps:
* 1 pair of aluminum loading ramps (10.6 tons / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment from the rear)
----Painting:
* Chassis, bogie, locking parts, rear support legs hot-dip galvanized
* Drawbar, axles, air tank painted in a black tone
----Information:
* Vehicle has full manufacturer's warranty until 03/2027
* Errors and prior sale are subject to change
* The trailer is in new condition and has only been used a maximum of 5 times
----Delivery time:
* Available for immediate delivery from Egestorf, near the A7 motorway
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
* 2 in 1 = for roll-off containers and as a low-bed trailer
----Brakes:
* EBS electronic braking system
* Emergency release device for spring brake cylinders
* Drum brakes
----Axles:
* 2 x 10-ton axles
----Suspension:
* Air suspension with lifting and lowering system and RTR valve
Blsdpfx Aozihcijc Toi
----Drawbar:
* Bent drawbar, 2,000 mm long, with pivoting drawbar eye 40 / 50 mm (without 8° eye)
* GHD height adjustment device instead of drawbar spring
----Electrical system / Lighting:
* Tire pressure monitoring with display option in the truck via EBS signal - without truck-side installation
* LED tail lights 12 / 24 V
* 15-pole power connector
----General components:
* Toolbox made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm
* Spare wheel holder on the right side
* Reflective contour marking tape on the sides and rear
* Side impact protection
* Plastic quarter fenders with splash guard
* Plastic rear impact protection buffer
* Foldable A-frame sign at the rear
----Loading platform:
* Main frame with raised outer frame for guiding roll-off containers
* Sheet steel floor with recesses for roll-off containers in the bogie area
* Continuous length of 5,500 - 7,000 mm possible
* Pneumatic 4-point locking system and mechanical plug-in stop angles at the front in the track, load securing certificate according to DIN 30722 - 1
* Welding bead as an anti-slip coating in the track area of the ramp
* Mechanical support legs at the rear
----Load securing:
* 1 pair of 10-ton UVV lashing rings at the front on the front wall support
* 3 pairs of 10-ton UVV lashing rings on the sides in the outer frame
* 4 x 2-ton lashing eyes in cloverleaf design on each side
* 4 x 8-ton lashing brackets recessed in the outer frame
----Ramps:
* 1 pair of aluminum loading ramps (10.6 tons / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment from the rear)
----Painting:
* Chassis, bogie, locking parts, rear support legs hot-dip galvanized
* Drawbar, axles, air tank painted in a black tone
----Information:
* Vehicle has full manufacturer's warranty until 03/2027
* Errors and prior sale are subject to change
* The trailer is in new condition and has only been used a maximum of 5 times
----Delivery time:
* Available for immediate delivery from Egestorf, near the A7 motorway
Sludinājums tika automātiski tulkots. Iespējamas tulkošanas kļūdas.
Piegādātājs
Piezīme: Reģistrējieties bez maksas vai piesakieties, lai iegūtu visu informāciju.
Reģistrēts kopš: 2001
171 Sludinājumi tiešsaistē
Nosūtīt pieprasījumu
Tālrunis & Fakss
+49 40 33... sludinājumi
Šie sludinājumi varētu arī jūs ieinteresēt.
Mazā sludinājuma
Egestorf
1 012 km
Rullplatformas piekabe
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
Mazā sludinājuma
Egestorf
1 012 km
Zema kravnes piekabe
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
Mazā sludinājuma
Egestorf
1 012 km
Rullplatformas piekabe
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
MÜLLER-MITTELTAL18 t.Außenroller Container Anhänger, 2 in 1
Jūsu sludinājums ir veiksmīgi dzēsts
Radās kļūda
























































































































